Micro Fiber Optic Gyroscope With Analog Output Nano Fiber Devices FOG
|
Detailed Product Description
|
Micro Fiber Optic Gyroscope With Analog Output Micro-Nano Fiber Devices FOG 1 Scope This document specifies the requirements and methods for the use
and maintenance of FCG-24 micro-nano fiber optic gyroscope (product
for short). 2 References and Standards GJB1649-1993 ESD Control Program for Electronic Products 3 Definitions None. 4 Product introduction 4.1 Product Overview FCG-24 micro-nano fiber optic gyroscope (hereinafter referred to as
this product) is an angular rate sensor integrating optics with
analog output, mechanics and electronics. It is based on the Sagnac
effect, integrates a variety of micro-nano fiber devices, and
realizes the detection process by detecting, processing and feeding
back the phase difference generated by two beams of light
propagating in opposite directions. This product is mainly composed of optical path components, circuit
components and structural components. It has the characteristics of
simple structure, no moving parts, no wear parts, fast start, small
size, light weight and so on. And can be apply to that attitude
control and measurement of the carrier. 4.2 Composition The product is mainly composed of the following components: A) an optical path assembly; B) Detection and control signal circuit board; C) Optical fiber ring skeleton, shell and other structural parts; 4.3 Appearance and dimension The product is cylindrical, with overall dimensions of φ24 mm ×
40mm Fig. 1 Outline drawing of FCG-24 micro-nano fiber optic gyroscope 4.4 Weight ≤40g. 4.5 Operating temperature -40℃~+65℃. 4.6 Storage temperature -55℃~+85℃. 4.7 Random vibration Random vibration level: 20g, frequency range: 20Hz ~ 2000Hz. Table 1 Main Performance Parameters
4.9.1 Mechanical interface The bottom surface of the product is the mounting surface, with 3 M3 threads and external mechanical connection. Figure 2 Installation Dimension 4.9.2 Power Requirements The external power supply to the product has two circuits, and the requirements are shown in Table 2: Table 2 External Power Supply Requirements
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Nano Fiber Optic Gyroscope Micro Fiber Optic Gyroscope Analog Output Fiber Optic Gyro |
Related Products
|
Fizoptika Vg1703 Replacement Silicon Photonic Integrated Fiber Optic Gyroscope Sensor |
|
High Precision Low Noise Level Reasonable Cost Fiber Optic Gyro Optical Sensor |
|
No Warm-Up Time Fiber Optic Gyroscope with Wide Dynamic Range 200g Output Mode RS-422 |
|
Close-loop Fiber Optic Gyroscope High Precision Inertial Angular Rate Sensor |
|
High Precision FOG Micro-nano Integrated Fiber Optic Gyroscope with Zero Bias Stability ≤0.8°/h 10s |
|
Mini Rs422 Fiber Gyro Good Non Linearity Zero Bias Stability |
Email to this supplier