Customized Powder Particle Dense Phase Pump Pneumatic Conveying

Customized Powder Particle Pneumatic Conveying Equipment Dense-phase Conveying Bin Pump

The silo pneumatic conveying pump adopts the positive pressure pneumatic conveying method to convey the powder materials, which is widely used in the conveying of fly ash, cement, cement raw meal, mineral powder and other materials in power plants. The transportation pipeline can be flexibly arranged according to the terrain conditions to realize centralized, decentralized, high-altitude and long-distance transportation. The transportation process is not affected by natural conditions, and can ensure that materials are not affected by moisture and environmental protection.

The equipment adopts PLC control system, which can be controlled automatically or manually. After long-term practice, it has been proved that the equipment has stable performance, reliable quality, and no dust pollution during transmission. It is an ideal pneumatic conveying equipment.

The bin pump, also known as the bin pump, is a relatively reliable dense-phase pneumatic conveying device for conveying powder materials under high pressure.

Large Capacity Pneumatic Conveying Bin Pump Parameter Table

Long-distance Pneumatic Conveying Bin Pump Parameter Table

Conventional Grid Pneumatic Conveying Bin Pump Parameter Table

Parameter Table Of Small Size Pneumatic Conveying Bunker Pump

Seven advantages of bin pump:

1. No pipe plugging
The pneumatic conveying bin pump can basically adapt to the pneumatic conveying of any powder material. The system installed with the pneumatic conveying bin pump will basically not block the pipe, and the reliability is very high. Even, it is very difficult to block pipes artificially

2. Long-distance pneumatic transmission
The bin pump can realize the ideal long-distance pneumatic transmission. At present, in domestic cases, only the dense-phase pneumatic conveying system with a conveying distance of more than 2000 meters and stable operation is available.

3. Low energy consumption
The conveying process of the bin pump has only three processes: feeding and pressurized conveying, omitting the steps of pipeline purging. The bin pump can realize full-pipe dense phase pneumatic conveying with low flow rate, and can stop conveying when there is no ash, which will not affect the next conveying process and will not block the pipe.

4. Small wear
Because the flow rate of the bin pump is low, the wear is in direct proportion to the flow rate. The pneumatic conveying flow rate of the bin pump is generally not more than 5m/s. Many customers who do not know much about the general number of high conveying pressure will increase the wear. In fact, the pressure of pneumatic conveying has nothing to do with the wear. The higher the conveying speed of the material, the more severe the wear will be.

5. High efficiency
Environmental protection is also used for dilute phase pneumatic conveying, but we have to admit that for the same conveying project, the conveying capacity of the bin pump can be more than twice as high as that of the dilute phase pneumatic conveying

6. Major
The bin pump has strong adaptability for dense phase pneumatic conveying, and can transport almost any powder

7. Simple configuration
The configuration of bin pump is very simple, and modular components can save a lot of costs