Steel Double Roller Minerals Processing Equipment Automatic Hammer Crusher Machine

Hammer Crusher Minerals Processing Equipment In Clay Brick Production Line

Double roller hammer crusher 

a) Double-roller hammer crusher structure: two rotors are arranged horizontally, the rotor rotational speed is 100 m/s respectively, the grinding chamber width is 600 mm, two power 55KW-2-pole motors, and two impellers are installed above the rotor to feed feed roller. An adjusting guide plate device is respectively arranged above and below the adjacent areas of the rotating edges of the two rotors.

b) The working principle of the double-roller hammer crusher: The material enters the crushing chamber, and is evenly fed by the feeding roller with frequency conversion speed regulation, so as to ensure that each hammer of the crusher has a sufficient crushing function. The left and right rotors rotate in the same direction, and the adjacent areas of the rotating edges of the two rotors move toward each other.

Features of Double Roller Hammer Crusher:

a) The design is reasonable, the working principle of the hammer mill is scientifically used, and the linear speed of the crusher's hitting material is improved.

b) This design changes the movement line of the material in the crushing chamber, makes full use of the crushing chamber space to expand the crushing area, and protects the screen to the greatest extent, so that the service life of the screen is more than doubled. Please refer to the schematic diagram: crusher When feeding from the left, the two rotors rotate clockwise, and the material moves from left to right under the impact of the hammer, and enters the crushing area of ​​the left tooth plate. When it runs to the center area, it forms a top-down movement direction , the right rotor hits the material from bottom to top, forming a strong hitting function of double line speed. The material instantly changes the direction of movement and enters the crushing area of ​​the right tooth plate from bottom to top. When the material touches the screen, all granular materials have been crushed into broken materials, which relieves the strong impact of the material on the screen.

c) The noise of the pulverizer: After testing, the no-load noise is 102 decibels, and the load noise is 95 decibels, which is basically the same as the 66X60 single-rotor pulverizer.

d) The machine runs smoothly, and the smoothness is better than that of the single-rotor pulverizer during operation. Put a 5-point copper coin vertically on the bearing support plate of the crusher and stand very stable.

Our service

Welcome to contact with BBT

BBT supply following machinery and project :

1. Full automatic clay brick making machinery ( belt conveyor , box feeder, roller crusher , fine grinder. double shaft mixer , wet pan mill ,brick cutter, brick extruder ,spare parts ...)

2. Brick drying system( small brick drying room, single layer brick dryer chamber , tunnel dryer, fast rapid dryer chamber )

3. Brick kiln project ( hoffman kiln, tunnel kiln )

4. Automatic brick making system ( brick setting/stacking machine, red bricks unloading machine, brick packaging machine ...)

5. Kiln firing system ( coal / gas /oil combustion system ,control system )

6. Whole brick making project design and construction .