PV110 MF110 Silage Machine Hydraulic Drives System Easy To Disassemble

Silage machine hydraulic drive system easy to disassemble

Quick Detail:

· Cast iron housing

· Hydraulic components

· Power components of hydraulic systems

· Higher efficiency

· Factory address CHINA DEZHOU

· Simple layout

· System Solutions

· Application Hydraulic system components

· Work fast

· Fully replace imported products

· Patent certificate certification

· 1 year warranty

Description:

Hydraulic pumps could produce hydraulic through tubing to the hydraulic motor, hydraulic motor to convert hydraulic energy into kinetic energy and through reducer slow down and increase torque, transfer to the mixing tank, by adjusting the servo controller angle of hydraulic pump so as to realize reversing and speed of the drum, in order to realize concrete loading, mixing, stirring, discharging and other operations.

(Self-cleaning filters are recommended) and use this pump/motor wisely!

Specifications:

PV+MF Series Technical parameter

Notices:

Hydraulic oil

The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.

As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.

Heat Exchanger

The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.

Tank:

The tank level and the water present in the oil should be checked daily. If the tank must be filled with oil, filtered hydraulic oil must be used, and all water in the tank must be removed as required.

Application:

Mixer truck: concrete mixer truck, cement mixer truck;

Coal mining machinery: scraper;

Industry: pharmaceutical machinery;

Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

FAQ

Q1. Can I have a sample order for silage machine hydraulic drive system?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for silage machine hydraulic drive system?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for silage machine hydraulic drive system?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty?

Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.