Celanese PPS Fortron 1140L4 GF40 Granules PolyphenyleneSulfide Resin 40% Glass Reinforced UL94 V0 Grade All Color

FORTRON® PPS Polyphenylene Sulfide:

If your design challenges are high temperature stability, extensive chemical resistance, high stiffness, high strength, and creep resistance at high temperatures, please consider choosing Fortron® PPS PPS. Fortron® PPS is a high-temperature resistant linear PPS with excellent size stability, self-flame retardant, and excellent chemical solvent resistance.The PPS is insoluble in any known solvent below 200℃, and it also shows excellent stability in both conventional and alternative automotive fuels.

The Fortron® PPS has standard injection molding grades for glass fiber and mineral enhancement or glass fiber / mineral blend enhancement, as well as many special grades, such as lubrication modification, low warping, fast molding, and other special performance improvements.Some Fortron® PPS grades meet ISO10993 and US Pharmacopoeia (USP) VI, and they are listed in the US Drug Master File (DMF 14844) and the US Medical Device Master File (MAF 1097).These grades also meet the European Directive 2002 / 72 / EC on food exposure and the BfR (Federal German Institute of Risk Assessment, formerly BgVV, Federal German Institute of Consumer Health Protection and Veterinary Medicine) standards.

Fortron® products have been designated for use in a wide range of injection
molding, such as components under automotive engine cover plates, drivetrain components, pumps, fuel system components, surface-mounted electronic and electrical components, hair dryers and pump components, protective non-adhesive coatings, medical equipment and power tools.The Fortron® PPS is also a preferred material for fuel cells and diesel vehicles because it can produce membranes and composites for these applications by extrusion and blow molding processes.

Linear Fortron® PPS can produce molten non-woven fabric using melt blowing and spinning bonding techniques.Fiber and fiber monofilaments produced by Fortron® PPS have been used for weaving or weaving transmission belts, flame retardant fabrics, and filter carriers.Seranis also offers non-filled, high viscosity Fortron® PPS products for extrusion and molding processes for the production of slabs, rods and other billets.These billets are usually used to process the samples.

PPS Fortron 1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and rigidity at elevated temperatures allows for good load bearing performance. This product has good weldability due to the modest filler level.
Applications made of this grade are electronical components (i.e. bobbins, lamp housings, brush holders) and various other components requiring strength and resistance to aggressive chemicals (i.e. automotive heaters, pumps, valves, fuel rails, microwave oven rings and distillation column packings).