| IM.LB01 |
| Functional Parameters | Alarm Function | It has an audible and visual alarm function. |
| Anti - interference | It can effectively prevent the gate from malfunctioning due to
external factors such as electromagnetic interference. |
| Passage Mode Setting | One - way passage, two - way passage, free passage (with wing arms
retracted), etc. can be set through the buttons on the main control
board. |
| Anti - tailgating | It prevents an excessive number of unauthorized people from passing
through at one time. |
| Anti - pinching Function | When the gate is closing, it will stop closing upon detecting an
anti - pinching signal. |
| Automatic Reset | After the gate is opened, if the user fails to pass within the
specified time, the system will automatically cancel the user’s
current passage permission. The default time is 10 seconds, and it
can be set through a switch. |
| Access Control | Multiple biometric devices can be connected to the external ports. |
| Power - off Gate Opening | The gate will open when the power is off. |
| Fault Detection | The control board supports fault type detection to assist in
analyzing the cause of the fault and handling abnormal faults. |
| Passage Indication | There are passage status indicator lights, and an alarm function
can be set for exceeding the stay time in the passage. |
| |
|
| Extended Functions | Vehicle Passage Mode | Normal: Normal pedestrian passage mode |
| Vehicle Passage: Passage mode for cars, electric vehicles, and
motorcycles |
| Voice Broadcast | A voice module can be extended, and the volume can be adjusted. |
| Opening/Closing Delay | The time delay for the gate to open after receiving the opening
signal and the time delay for the gate to close after pedestrians
pass can be set. The default value is 0 seconds |
| Card - swiping Inside the Passage | Enabled: Card - swiping verification is allowed inside the passage. |
| Default Disabled: Card - swiping inside the passage (in the
induction infrared area) is invalid. |
| Whether to Block with Gate Closing for Tailgating and Reverse
Passage | The gate will not close for reverse or tailgating passage (Person A
swipes the card, and Person B passes). |
| The gate will close once and then open again for reverse or
tailgating passage. |
| The gate will close for reverse or tailgating passage and will not
open again. |
| Fire - fighting Linkage | Normally Open Mode: The gate remains in the open state. |
| Normally Closed Mode: The gate remains in the closed state. |
| Passage Modes | Two - way Passage: Two - way card - swiping for normal pedestrian
passage. |
| Two - way Free Passage: Two - way free passage without card -
swiping verification. |
| One - way Passage: One - way (A) card - swiping to open the gate
for normal pedestrian passage. Reverse (B) card - swiping is
invalid, and the gate remains closed. |
One - way Free Passage: One - way (A) free passage, and reverse (B)
requires card - swiping verification.
Prohibited Passage: Two - way card - swiping is invalid, and the
gate is locked. |
