| Arc Speed Gate Turnstile <TDH-ST606> Product
Specifications |
| Product Icon | Document Number: | |
| Edition: | A/0 |
| Revision Time: | |
| Revised By: | |
| |
| Product Parameters | Dimensions: | Length 1400*Width 120*Height 980mm | Box Material: | Box: Stainless Steel SUS304 Foot 1.5mm
Upper Cover: Stainless Steel SUS304 Foot 1.5mm |
| Swing Arm Material: | 10mm Acrylic Swing Door | Channel Width: | Open Type; Recommended ≤1000mm |
| Technical Parameter | ◆ Box material: austenitic stainless steel SUS304
◆ Internal structure: frame structure / stainless steel shell
surface drawing, whole machine planing
◆ Power supply voltage: AC220V±10V
◆ Drive motor: DC brushless motor (24~36VDC)
◆ Movement structure: high-precision anti-collision movement,
high-strength clutch, return in case of resistance, high strength,
impact resistance;
◆ Service life: more than 8 million times of continuous opening and
closing
◆ Infrared sensor: 8 pairs; (support more than 8 pairs of
configuration)
◆ Working environment: -35℃～75℃
◆ Relative humidity: 0～90% (no condensation)
◆ Communication interface: RS232 serial port
◆ Communication protocol: MODBUS protocol
◆ The working speed of the turnstile: ≤45 people/min (the memory
mode can be turned on)
◆ Passing time: swiping card travel time: 10S (if no one passes
within 10S: the gate will automatically close, and the time can be
adjusted according to needs) |
| Technical Parameter | Basic Function | ●Alarm function: with sound and light alarm function |
| ●Anti-interference: It can limit the abnormality of the gate caused
by external factors such as electromagnetic |
| ●Pass mode setting: One-way pass, two-way pass, free pass (wing arm
retraction), etc. can be set through the buttons on the main
control board |
| ●Anti-trailing: prevent the non-permissible situation of too many
people at one time. |
| ●Anti-pinch function: When the gate is in the process of closing,
the gate will stop closing after detecting the anti-pinch signal |
| ●Auto reset: After the gate is opened, if there is no passage
within the specified time, the system will automatically cancel the
user's access authority; the default is 10 seconds, and the passage
time can be set by the switch |
| ●Access control: The external port can connect a variety of
biometric devices |
| ●Power off and switch off: switch on after power off |
| ●Fault detection: The control board can support fault type
detection, assist in analyzing the cause of the fault, and handle
abnormal faults. |
| ●Traffic indication: There is a traffic status indicator; and an
alarm function for exceeding the stay time in the channel can be
set |
| |
| Expanding Function | ▲Passing mode
△Normal: Normal passing mode
△ Passing: automatic car/electric car/motorcycle passing mode |
| ▲Voice broadcast, expandable voice module, and volume adjustment |
| ▲Open/close delay, set the delay opening time after the gate
receives the opening signal/set the delay closing time after
pedestrians pass, the default is 0 seconds |
▲ Swipe the card in the channel
△ Disabled by default: card swiping in the channel (induction
infrared area) is invalid
△Allow: Card verification is allowed in the channel. |
▲Whether the trailing and reversing are blocked by closing the door
△Do not close the gate: the reverse/trailing (A swipe card, B pass)
will not close the gate
△Close the gate first and then open the gate: close the gate first
for reverse/trailing traffic, and then open the gate again after
closing
△Do not open the gate after closing the gate: the reverse/trailing
traffic will close the gate, and the gate will not be opened again
after closing |
▲Fire linkage
△Normally open mode: the gate remains open
△ Normally closed mode: the gate remains closed |
▲Passage Mode
△Bidirectional passage,swiping card bi-directionally for people
flow.
△Bidirectional free passage, no credit card verification is
required.
△Single directional passage, Single directional (A) swiping card,
and the gate opens normally for people flow; reverse directional
(B) swiping card is invalid, and the gate closes.
△Single directional free passage, Single directional (A) free
passage, and reverse directional passing (B) require a swiping card
verification.
△Passing is prohibited, Bidirectional swiping card is invaild, and
the gate enters the locked state. |
|
