| Product Parameters | Dimensions | 1200*280*980mm | Housing Material: | Housing: SUS304 0.8MM
Top Cover: SUS304 1.2MM |
| Wing Arm material: | 15MM Acrylic wing board | Channel width: | 550MM |
| Technical Parameters | ◆Housing Material: SUS304
◆Internal structure: standard stainless steel shell;outdoor plastic
module PC material (PC 10 years warranty)
◆Power Voltage: AC220V±10V
◆Drive motor: DC brushless motor(24~36VDC)
◆Movement structure: full-height direct-drive movement, fixed with
upper and lower screws, firmly bearing force; high-precision
movement and motor direct drive, higher precision, faster opening
and closing speed, longer service life (patented product);
◆Service life: 5,000,000 times
◆Infrared sensor: 3 pairs (can support 5 pairs of configuration)
◆Working temperature:-35℃～75℃
◆Relative humidity:0～90%(non-condensing)
◆Communication interface: RS232 serial port
◆Communication protocol: MODBUS protocol
◆Turnstile working speed: 45~50 people/min; double-flying wing
configuration ≤ 30 people/min (memory mode can be turned on)
◆Passing time: swiping card travel time: 10S (if no one passes
within 10S: the gate will automatically close, and the time can be
adjusted according to needs) |
| Function | Basic Function | ●Alarm function: with sound and light alarm function |
| ●Anti-interference:It can limit the abnormality of the gate caused
electromagnetic and other external factors |
| ●Traffic mode setting:One-way, two-way, free traffic, etc. can be
set through the buttons on the main control panel |
| ●Anti tailing: prevent the unauthorized situation of too many
people at same time. |
| ●Anti pinch function:When the gate is in the process of closing,
the gate will stop closing after detecting the anti-pinch signal |
| ●Automatic reset: after opening the gate, if the user does not pass
within the specified time, the system will automatically cancel the
user's permission to pass this time; The default is 10 seconds, and
the traffic time can be set through the switch |
| ●Access control: External port can connect a variety of biometric
devices |
| ●Power off and opening:switch off after power off, and the switch
opening direction can be set |
| ●Fault detection:Control board can support fault type
detection,Assist in analyzing the causes of faults and handling
faults and abnormalities. |
| ●Passing indication: with passing status indicator; It can also set
the alarm function of exceeding the stay time in the channel |
| |
| Extension Function | ▲ Passing Mode
△ Normal: normal pedestrian passing mode
△ Passing: automatic vehicle / electric vehicle / motorcycle
passing mode |
| ▲Opening / closing delay, set the delay opening time after the gate
turnstile receives the opening signal/set the delay closing time
after pedestrians pass, the default is 0 seconds |
▲Card swiping in the channel
△Default forbidden: card swiping in the channel (inductive infrared
area) is invalid
△Permission:card swiping verification is allowed in the channel |
▲Whether the trailing and reversing are blocked by closing the door
△The gate Closed: the reverse/trailing (A swipe card, B pass) will
not close the gate
△Close the gate first and then open the gate: close the gate first
for reverse/trailing traffic, and then open the gate again after
closing
△Do not open the gate after closing the gate: the reverse/trailing
traffic will close the gate, and the gate will not be opened again
after closing |
▲Fire linkage
△Normally open mode: the gate remains open;
△ Normally closed mode: the gate remains closed |
▲System language function
△Chinese: The system can set the Chinese interface
△English: The system can set the English interface |
▲Passage Mode
△Bidirectional passage,swiping card bi-directionally for people
flow.
△Bidirectional free passage, no credit card verification is
required.
△Single directional passage, Single directional (A) swiping card,
and the gate opens normally for people flow; reverse directional
(B) swiping card is invalid, and the gate closes.
△Single directional free passage, Single directional (A) free
passage, and reverse directional passing (B) require a swiping card
verification.
△Passing is prohibited, Bidirectional swiping card is invaild, and
the gate enters the locked state.
△Passing is prohibited, the two-way card swiping is invalid, and
the gate enters the locked state |
|
The IRONMAN Barrier Turnstile Gate is the perfect outdoor access
control solution for entry into any building or facility. With its
advanced flap barrier gate system, it provides a secure and
reliable entry control system to help safeguard against any
unauthorized or malicious entry. This intelligent system is
designed with a control mode that supports
IC/ID/Barcode/Fingerprint, and is equipped with a sleek silver
color that can blend in perfectly with any outdoor environment. The
advanced automatic system is designed with a humidity of ≤90%RH and
a voltage of 110V/220V, making it suitable for any outdoor
conditions.
The IRONMAN Barrier Turnstile Gate is the perfect solution for any
outdoor entry control system that requires a secure, reliable, and
intelligent system. With its advanced flap barrier gate system,
IC/ID/Barcode/Fingerprint control mode, and humidity and voltage
protection, this system is guaranteed to provide the highest level
of security for your facility.
