LoRaWAN Energy Meter IoT Wireless 3 Phase Electric Meter Wall Mounted
|
|
Three Phase LCD Digital Display Lora Wireless Lorawan IoT Smart Electric Energy Meter for Energy Measurement
DTZY2397 three-phase four wire charge control intelligent electric
energy meter is a new generation of intelligent high-tech remote
electric energy metering product. It is based on MCU+measurement
chip technology. Large scale digital signal processing chip is
adopted. It is designed and manufactured according to the relevant
international (IEC) standards of electric energy meters and China's
electric power standards. With LoRaWAN/CAT1/Bluetooth wireless
communication modules, communication distance and networking
problems are solved. It has the characteristics of high precision,
low power consumption and good stability. An important part of the
modernization of distribution management can be realized without
complex cabling. It can be widely used in the measurement of
three-phase AC power in cities, rural areas or factories and
enterprises.
1. Metering positive active, negative active and ABC split phase
active electric energy function. It can measure, store and display
the ABC voltage, current, total and three-phase active power, total
and three phase power factor, frequency and other operating
parameters and status of the current watt hour meter. It has
overload protection function. 2. Remote power off and transmission function: send power off
command through RS485 and other communication interfaces to cut off
the user's load circuit. Or send the power transmission command to
connect the user load circuit. 3. Active upload/two-way transparent transmission function:
actively transmit data to the corresponding platform through
LoRaWAN/CAT1/Bluetooth (optional) wireless network. The default
interval is 4 hours (settable).
The meter is fully displayed after power on, and then displays the total active energy kWh and total power kW in turn. Full display Total active power Total power LCD full screen display 0.08kWh 0.0396kW
Universal current terminal wiring diagram Wiring diagram of the three-phase four-wire mutual inductance table Wiring diagram of three-phase four-wire straight through meter
table
Live installation of wiring is strictly prohibited! The electricity meter shall be installed indoors as far as possible. Special instrument box protection shall be used for outdoor installation. The installation bottom plate shall be fixed on the wall with strong fire resistance and not easy to vibration. There must be no corrosive gases in the surrounding air where the meter is installed. Avoid dust, salt spray, etc. When using the electricity meter, the wiring must be conducted strictly according to the wiring diagram in the tail cover of the meter. It is recommended to use copper wire for the lead connected to the terminal seat. The screws of the fixed lead in the terminal seat should be tightened to avoid burning the electricity meter due to bad contact and heating. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Plastic LoRaWAN Energy Meter Wall Mounted LoRaWAN Energy Meter IoT 3 Phase Electric Meter | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Anti Corrosion LoRaWAN Energy Meter LCD Display Smart Energy Meter IoT |
|
Din Rail LoRaWAN Energy Meter Smart Single Phase AS923MHz EU868MHz AU915MHz |
|
Single Phase Lorawan Electric Meter 50Hz Wifi Smart Energy Meter With Gsm Modem |
|
Smart LoRaWAN Energy Meter Wireless Single Phase Power Meter Insulation Resistance |
|
IOT LoRaWAN Electricity Meter 5(80)A 220V Smart Din Rail Single Phase Energy Meter |
|
Wireless LoRaWAN Energy Meter Smart IoT Three Phase Electric Meter |