100Gb/s QSFP28 MMF Active Optical Cables
MFA1A00-Cxxx are QSFP28 VCSEL-based (Vertical Cavity
Surface-Emitting Laser) active optical cables designed for use in
100Gb/s Ethernet systems.
MFA1A00-Cxxx AOC offers high port density and configurability, and
a much longer reach than passive copper cables in the data centers.
Since the AOC is hot pluggable, it is easy to install and replace.
MFA1A00-Cxxx has a standard SFF-8665 compliant QSFP28 port on the
electrical side towards the host system. It contains four
multi-mode fibers (MMF) optic transceivers per end, each operating
at data rates of up to 25Gb/s.
MFA1A00-Cxxx offers selectable retiming per lane for both its
optical transmitters and receivers for the 25Gbp/s rates, but the
AOC also supports lower bit rates without retiming. The
transmitters have programmable input equalizers and input squelch
function, while the receivers have programmable output amplitude
and pre-emphasis.
Mellanox’s unique, quality, active, fiber, cable solutions provide
power-efficient connectivity for data center interconnects. They
enable higher port bandwidth, density and configurability at a low
cost and reduced power requirement in the data centers. Rigorous
production testing ensures the best out-ofthe-box installation
experience, performance and durability. High-Speed Interconnects
The latest rapid growth in data center traffic and cloud computing
has resulted in tremendous increases in machine-to-machine traffic
due to rapid adoption of server virtualization, software-defined
networks (SDNs), and in-cloud computing. Now add the massive
bandwidth requirements for networking terabytes of data for
training Artificial Intelligence (AI) machine learning (ML)
GPU-based systems. This is driving massive demands for high-bandwidth and low-latency
networks. High-speed DAC and AOC cables and optical transceiver
interconnects are playing a critical role in these modern data
center technologies.
HIGHLIGHTS
–Up to 100Gb/s data rate
– 4x25G NRZ
– 2.2W power dissipation (typ, each end, with retiming)
– Programmable Rx output amplitude and pre-emphasis
– Programmable Tx input equalizer – Selectable retiming
– SFF-8665 compliant QSFP28 port
– Single 3.3V power supply
– BER better than 1E-15
– Up to 100m length
– Hot pluggable
– RoHS compliant
– SFF-8636 compliant I2 C management interface
| OPN | Description | | MFA1A00-C003 | active fiber cable, ETH 100GbE, 100Gb/s, QSFP, LSZH, 3m | | MFA1A00-C005 | active fiber cable, ETH 100GbE, 100Gb/s, QSFP, LSZH, 5m | | MFA1A00-C010 | active fiber cable, ETH 100GbE, 100Gb/s, QSFP, LSZH, 10m | | MFA1A00-C015 | active fiber cable, ETH 100GbE, 100Gb/s, QSFP, LSZH, 15m | | MFA1A00-C020 | active fiber cable, ETH 100GbE, 100Gb/s, QSFP, LSZH, 20m | | MFA1A00-C030 | active fiber cable, ETH 100GbE, 100Gb/s, QSFP, LSZH, 30m |
FAQ
Q1.What can you buy from us?
A:Mellanox, Aruba, Rukus, Extreme brand
products, including switches, network cards, cables, Access
Point, etc.
Q2.How about the delivery date?
A:It usually takes 3-5 working days. For
specific models, please contact us to check the stock. In the end,
the actual consultation shall prevail.We will
do our best to deliver as soon as possible.
Q3.What's your warranty terms?
A: We supply 12 months warranty time.
Q4.How about the Shipping Method?
A: We use Fedex/DHL/UPS/TNT and other air
shipments,sea shipments are also workable. In one words,
we could do any shipments that you wanted.
Q5.Can I get some samples?
A:Yes, sample order is available for quality
check and market test. You only need to pay the sample cost
and express cost.
Q6.What are your core strengths?
A:First-hand supply, Original and new products
with the favorable price and perfect after-sales.
|
