Anritsu MS9740A Optical Spectrum Analyzer Long Wavelength 600nm -
1750nm Optical Spectrum AnalyzerDescription of Anritsu MS9740A- ANRITSU MS9740A The Anritsu MS9740A is an Optical Spectrum Analyzer
"all-in-one unit" that has the performance and functions for
evaluating all active optical devices, including SFP, XFP, and SFP+
modules, as well as optical transceivers and VCSEL and DFB optical
sources. Evaluation results, such as center wavelength, level,
spectrum, SMSR, OSNR, etc., are displayed on one screen.
Combination with a Bit Error Rate Tester (BERT) supports spectrum
analysis of optical transceiver outputs and WDM signals. The
MS9740A Optical Spectrum Analyzer reduces the total time from
waveform sweeping to data transfer to external control equipment
and supports simple analysis procedures (up to 80% faaster than
some competing models), offering excellent cost performance and
better productivity.
Feature: - Specifications for the Anrtisu MS9740A include:
- Applicable optical fiber: 10 µm/125 µm SM fiber (ITU-T G.652), 50
µm/125 µm GI fiber
- Optical connector: User replaceable: FC, SC, ST, DIN, LC
- Wavelength measurement range: 600 nm to 1750 nm Wavelength
- accuracy: ±20 pm (1520 nm to 1620 nm, Resolution: 0.03 to 0.2 nm)
(specs shown with option 002 installed) ±100 pm (1520 nm to 1620
nm, Resolution: 0.5, 1.0 nm) (specs shown with option 002
installed) Setting resolution: 0.03, 0.05, 0.07, 0.1, 0.2, 0.5, 1.0
nm (RBW: 3 dB optical filter: transmission bandwidth)
- Maximum input power: +23 dBm (Optical ATT: On)
- Dynamic range: High dynamic range: 60 dB (0.4 nm from peak
wavelength)
- Normal dynamic range: 58 dB (0.4 nm from peak wavelength)
[Resolution: 0.05 nm, 1550 nm, Optical ATT: Off, 20° to 30°C]
- Sweep: Sweep width: 0.2 nm to 1200 nm, 0 nm Sweep speed: =0.2 sec.
(Span 5 nm)
- [Resolution: 0.1 nm, VBW=10 kHz, Normal dynamic range, center 1550
nm, sweep start to stop, no optical input, sampling point: =501]
Dimensions and Mass 426 (W) × 177 (H) × 350 (D) mm (excluding
projections) =15.0 kg (without option)
- Ideal Solution for Active Optical Device Evaluation This all-in-one
unit has the performance and functions for evaluating all active
optical devices, including SFP, XFP, and SFP+ modules, as well as
optical transceivers and VCSEL and DFB optical sources. Evaluation
results, such as center wavelength, level, spectrum, SMSR, OSNR,
etc., are displayed on one screen. Combination with a Bit Error
Rate Tester (BERT) supports spectrum analysis of optical
transceiver outputs and WDM signals.
- Wavelength sweep time <0.2 s
- Built-in application for optical active device evaluation (LD
module test)
- Option for multimode measurements (Multimode Fiber Interface
(50/62.5 µm) option MS9740A-009 )
- Supports LC connector using conversion adapter
- All-in-one function (MM mode) supporting SM and MM fiber
List of Options001 | GPIB Interface | 002 | Light Source for Wavelength Calibration | 037 | FC Connector |
|