MITPC1K (3.6KW-5KW) Bi-Directional Energy Storage Inverters MITPC1K series products are bi-directional energy storage inverters, suitable for photovoltaic systems with batteries to store energy. To maximize the energy generated by the photovoltaic system to the load; If there is spare energy left to charge the battery, it will be sold to the grid when there is still spare energy. When the pv energy output is insufficient to support the connected load, the system automatically draws energy from the battery if the battery power is sufficient. If the battery is not powerful enough to meet the load, energy is drawn from the grid. Widely used in household energy storage, communication base station.  MITPC1K (3.6KW-5KW) Bi-Directional Energy Storage Inverters MODEL | MITPC1K-****A | power rating (W) | 3600 | 4200 | 4600 | 5000 | Rated battery voltage (V) | 48 | Photovoltaic Input (DC) | Maximum recommended DC power (W) | 4100 | 4800 | 5300 | 5750 | Rated DC working voltage (V) | 360 | Large DC voltage (V) | 550 | MPPT voltage range (V) | 120~550 | Maximum input current (A) | 11/11 | Maximum short-circuit current (A) | 15/15 | MPPT, and for the input quantity | 2 | Number of MPPT group strings per route | 1 | Inverter Output (AC) | Rated AC output power (W) | 3600 | 4200 | 4600 | 5000 | Rated output voltage (V); range (V) | 220/230/240;180-280 | AC Frequency (Hz); Frequency Range (Hz) | 50/60;45~55/55-65 | Rated Output current (A) | 15.7 | 18.3 | 20.0 | 21.8 | Maximum output current (A) | 16.4 | 19.1 | 21.0 | 22.8 | Output current harmonics (THDI) | <3% | rated power factor | 1 | Power factor range | 0.8 ahead of ~ 0.8 lag | Battery Mode Output (AC) | Output rated power | 2300 | Rated output voltage (V); precision range | 230±1% | Output frequency (Hz); precision range | 50 / 60 (optional) ± 0.2% | Output rated current (A) | 10 | discharge waveform | pure sine wave | Output current harmonics (THDI) | <3% | The Battery & Charger | Battery type | Lead-acid battery / lithium battery | cell voltage (V) | 48 | Battery Voltage Range (V) | 40~60 | charging curve | The 3 paragraph | Over-current protection / overheat protection | Yes, /, yes | Maximum charge and discharge power (W) | 2500 / 2500 | Maximum charge and discharge current (A) | 50 / 50 | productiveness | peak efficiency | 97.3% | European efficiency | 96.8% | MPPT productiveness | 99.9% | protector | DC input switch | yes | Power grid detection | yes | Output over-current protection | yes | Output overpressure protection | yes | Ground fault detection | yes | Integrated leakage current protection device | yes | other | Dimensions (width, * height, * deep) (mm) | 480*420*215 | net weight (kg) | 25 | 25 | 27 | 27 | DC connection | H4 / MC4 | AC electrical connection | binding post | show | Light-emitting diode + LCD screen | communication interface | Wireless Network / USB / GPRS / RS485 | levels of protection | Level of protection, IP65 | humidity | 0~95% RH (no condensation) | operating temperature range | -20℃ + 60℃; 45℃ | Heat dissipation mode | natural cooling | height | <3,000 m | Note: We are committed to technological innovation, constantly providing better products and services to meet customer needs, and update to product design and technical specifications without notice.The physical product shall prevail. | MITPC1K (3.6KW-5KW) Bi-Directional Energy Storage Inverters Product features - Adopt fan-less and natural heat dissipation design, protection grade reaches IP65, suitable for outdoor use
- Two MPPT inputs are used to track the maximum power of solar panels with different installation modes
- The wide MPPT voltage range of 120-550V is used to ensure the reasonable connection of solar panels
- The grid-connected side without transformer design, high efficiency, maximum efficiency up to 97.5%
- With over voltage, over current, overload, over frequency, over temperature short circuit protection functions
- Adopt hd and large LCD display module, which can read various data and set various functions
- There are three working modes: load priority mode, energy storage mode and UPS mode, and the priority level can be set
- With USB, RS485, WIFI and other communication functions, through the host computer software or APP monitoring data
- The grid-connected and disconnected network reaches MS level
- It has two output interfaces for main load and ordinary load, which can ensure the continuous use of important load
- It can be used with lithium battery
- Anti-countercurrent function can be set to sell or not to sell electricity (optional)
|