Lixian Horizontal Dynamic Balancing Machine 180-1000R/Min Rustproof
|
Dynamatic Balance Machine- 1600kg Universal Joint Transmission Structure Hard Bearing Balancing Machine
Description The display part of this product is in the form of a 19-inch LCD screen, which not only has the characteristics of large measurement range, high efficiency, safe and simple operation, and intuitive display, etc., and occupies a leading position in the domestic balancing machine industry. Before the operation, as long as the distance between the two calibration surfaces of the workpiece to be calibrated, the distance between the calibration surface and the support point and the corrected radius data are set, the unbalance of the workpiece and the corresponding phase value can be displayed correctly under one start.
Technical Parameters
Standard scope of supply
HZ-602 Industrial Control Measurement System The measurement system is the core of the balancing machine. This system uses the latest CPU computing chip, and then performs operation to display the measurement data after signal amplification, filtering, and analog-to-digital conversion. At the same time, it also has the output of database, communication data and control signal, including the connection of printer. Human-machine dialogue interface, intuitive and simple operation, suitable for display mode in industrial production environment. After strict multi-level component screening, large-scale electrical circuit manufacturing process, coupled with high and low temperature aging tests, it can be suitable for balancing machines to perform accurate measurements in different environments.
Precautions Installation of balancing machine 1. The compressive strength of the foundation concrete is ≥16MP, the foundation uses No. 525 cement, and the secondary grouting uses No. 625 cement. 2. The installation level of the machine is ≤0.2/1000. The machine needs to be grouted twice after adjusting the level. When grouting, it should be fully padded, and the anchor bolts should be tightened after the foundation is completely dry. 3. For details, please refer to the foundation installation drawing of HW-1000 type balancing machine Computer type Digital type
Purpose An unbalanced rotor generates a pressure on its supporting structure and the rotor itself during its rotation, and causes vibration. Therefore, the dynamic balance of the rotor is very necessary. The balancing machine is to check the dynamic balance of the rotor in the rotating state. The function of dynamic balance is: ● Improve the quality of the rotor and its components ● Reduce noise ● Reduce vibration ● Improve the trial life of supporting parts (bearings) ● Reduce user discomfort ● Reduce the power consumption of the product
Unbalance amount calculation Where mper is the allowable unbalance: M: represents the weight of the rotor, the unit is kg G: represents the balance accuracy grade of the rotor, the unit is mm/s r : represents the correction radius of the rotor, the unit is mm n: represents the speed of the rotor, the unit is rpm.
The balanced quality grades of commonly used various rigid vermilion drills
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: 180R/Min Dynamic Balancing Machine 1000R/Min Dynamic Balancing Machine Rustproof Horizontal Dynamic Balancing Machine |
![]() |
Rotor Belt Drive Dynamic Balancing Machine Manufacturer 1~20 KG 400-3000 R/Min Balance Speed |
![]() |
1/2/3 Plane Balancing Machine System 120W With 0-6000rpm Rotation Speed |
![]() |
220V LED Display Dynamic Balancing Machine 6000rpm For High Precision |
![]() |
ISO 21940 Dynamic Balancing Machine For Grinding Plate Rotor Unbalance Correction 2000MM |
![]() |
120 N.M Dynamic Balancing Machine Of Drive Shaft Torque 1000kg Of ISO 21940 Test |
![]() |
Grinding Wheel Motor Dynamic Balancing Machine Rotor Pump 120-5000 R/Min 1000KN |