HF-60KW High Frequency Induction Heater For All Metal Hardening Quenching Machine

HF-60KW Digital Induction Heating Equipment for All Metal Hardening , Quenching

Main Characteristic:

1. Front Panel use the LCD Touch Screen, Key and Power Switch, all digital display, can use Switch Signal( Electrical frequency signal) to control the machine start and stop, and control the power via PLC.

Visual Human-computer Interface makes the operator feel more intimate and intuitive.

2.  Induction Heating Machine have remote control function and adopt digital circuit control, power regulation can be adjusted from 1% to 100% resolution, and digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically)

3. There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.

4.  Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
5. 100% Duty cycle, continuous working is allowed at maximum power output.

6. Energy Saving Up to 20-30% compare with SCR machine.

Advantage: 

1. Infineon IGBT type,Can save 20-30% electricity compare SCR parallel type

2. Series Resonance IGBT type machine, will not interference other equipment working, No need special input transformer to working this machine. Will not pollute electricity Net.

3. After we debug the machine in our company, then you can use it directly. Very convenient.

4.  Digital type machine, frequency, power, current can shows in the touch screen, easy to control the machine and see the working efficiency.

5.  Light weight, small Size

6. Transformer Ratios can connect different Induction coils. Work different workpiece.

7.  Large working application, annealing, quenching/Hardening. 

Paramater: 

Application:

Quenching and Hardening all Different Shafts, Gear, Rollings and so on 

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.