We are China Scrap Briquetting Presses factory located in Jiangsu
provice.
Description:
Our Y83-6300 scrap metal briquette press gets the metal scrap
briquetted for second fusion instead of using the waste steel, pig
iron, aluminum ingot and scrap copper directly as raw materials,
lessening the melting loss and improving the utilization of waste
materials. It is commonly applied in the aluminum alloy section
plant, diverse casting plants of steel, aluminum, copper and other
materials.
This scrap metal briquette press is configured with PLC for
automatic operation. The feeding system is also adopted, keeping
high efficiency. With the diameter of 160mm, 180mm and 200mm and
the height of 300mm, the briquette can be specially designed in
size to fulfill the demands of users.
Technical Parameters:
Model | Y83-6300 |
Cylinder pushing /shearing force | 630 ton |
Maximum working pressure | 25MPa |
Oil tank capacity | 1800L approx. |
Capacity | 2000-3000kgs/h |
Bale dimensions (LxWxH) | D180x(70-100)mm |
Theoretical dry cicle time | 20 sec. |
Motor | 45kW |
Operation method | PLC Automatic Control Button Control Sigle/Continues |
Weight | 18000 (kgs) |
Machine dimensions (LxWxH) | 2700x1200x4100mm 1500x1600x2200mm |
Application :
Under the situations that it is not heated or added with additives,
the scrap metal briquette press is capable of pressing diversified
granular and powdered materials into high density cylindrical
briquettes that are hard to become loose. It processes the waste
materials like scrap steel, cast iron, pig iron, aluminum ingot,
waste copper, magnesium, titanium and molybdenum for secondary
fusion instead of using them directly.
Our product makes it easy to recycle, smelt, store and transport
the scraps. Moreover, it reduces the cost and melting loss so that
the utilization rate of the waste is increased.
This product is commonly seen in the aluminum alloy section plant,
steel, aluminum and copper casting plants, etc.
Details:
Structural Style
This scrap metal briquette press varies in vertical and horizontal
structure. Therein, the vertical product is equipped with or
without feeding cylinder. The diameter of bale can be designed in
the designated range according to users' need. If there is no
special requirement, the machine that weighs less than 200ton is
structured with welded frame.
