99.99% Hepa Laminar Flow Hood Vertical horizontal Air Flow Cabinet For Tissue Culture Microbiology
JH series Super laminar flow hood
Technical parameters | Product type | JHP horizontal airflow | JHZ vertical airflow | | one person JHP-1 | two person JHP-2 | one person JHZ-1 | two person JHZ-2 | | Cleanliness rating | The international ISO 14644.1 standard, CLASS 5 (U.S. Federal 209E,
100 level) | | wind speed | 0.3~0.6m/s(Adjustable) | | Noise (dB) | ≤62 | | Vibration half peak | ≤3μm(X,Y,Z direction) | | High efficiency filter | Efficiency 99.99% | | Illumination(LX) | ≥300 | | Work environment | Ambient temperature 10~30℃, Relative humidity below 70%, No obvious vibration and dust around | Overall size(mm)
(H×W×D) | 1585×990×735 | 1585×1460×735 | 1585×990×735 | 1585×1460×735 | Inner size(mm)
(H×W×D) | 500×830×550 | 500×1300×550 | 500×830×680 | 500×1300×680 | | Voltage(V)/ | AC220V/50Hz | | Power(W) | 200 | 400 | 200 | 400 | | Net weight (KG) | 120 | 210 | 110 | 210 | | Shipping weight(KG) | 130 | 235 | 130 | 235 | Packing size(mm)
(H×W×D) | 1030×1180×855 | 1030×1650×855 | 1030×1180×855 | 1030×1650×855 |
Remarks:Vertical airflow series can be custom-made to single sided
and double sided.
Optional accessories
1, timed sterilization system;
2, the filter failure alarm procedures;
3, programmable UV sterilization control procedures;
4, can be equipped with the ULPA ultra-high efficiency filter
(rejection rate of up to 99.999%) - All technical data in the no-load conditions, ambient temperature
is 25 ℃, relative humidity is 50% RH, the voltage fluctuation is ±
10% around without obvious vibration and dust conditions to test.
- KENTON may change the above technical parameters at any time. There
is deviation about product appearance due to some factors such as
the photographic or printed result, please understand and reserves
the final right of interpretation.
Meet international standard:
Products standard: NSF 49; EN12469
Temperature safety standards:Germany DIN 12880 Class 3.1
Electrical safety standards: International IEC61010-1
US UL61010-1
EU EN61010-1
JH
Laminar flow hood 3-years warranty - Applicable in the field of protection of the needs of the
biotechnology, pharmaceutical, life sciences and precision
electronic products;
- CLEANFLOW-JHl Series Clean Bench combined with perfect airflow
mechanical design for the operator to create a partial purification
of the work environment so that experiments can be carried out
smoothly;
- Comply with Australia AS1386.5 and the European Union EN12469
standard, clean grade of the international ISO14644.1 standard
CLASS (U.S. Federal 209E, 100 level)
- IQ, OQ, PQ and other related certification services.
- CE certification. Three-year warranty period.
SANGMATM micro-computer control technology - Integrated LCD dot matrix LCD display, real-time display the status
of lighting, sterile, air flow and other parameters.
- User-friendly design, with sterilization, lighting, interlock
functions to protect the operator from UV light burns, and ensure
safe operation.
- Wind speed multi-level adjustable, the air volume can be adjusted
according to the user.
CLEANFLOWTM clean air technology
- Centrifugal wind wheel low-power motor, based on airflow mechanics
principle, arc-shaped large-diameter inlet design to reduce
turbulence generated to ensure low noise operation of the system.
- Reasonable duct design, optimized net press box, with micro-mesh
design layer outflow wind deflector, convex, no dead ends, to
ensure the uniformity and stability of the airflow.
- Standard early-efficient and efficient double-filter, primary
filter to avoid airflow dust particles to enter and extend the life
of high efficiency filter. High efficiency filter without clapboard
HEPA, retention efficiency of 99.99%.
- According to the customer's requirements, CLEANFLOWTM series with the vertical flow and horizontal airflow
- The front overall tilt design, low noise operation, increase
operation comfort;
- Operating room standard with gas water interface, splash-proof
power outlet to facilitate the experiments carried out smoothly;
- With weight up and down sliding front door, can be anchored;
- Built-in lighting system to provide the best illumination angle and
brightness, reduce visual fatigue;
- On both sides of translucent double-glazed side windows, to enhance
the light permeability, and non-convex design of the work area, no
death and no spoiler design.
- The platform using an anti-corrosion resistance of SUS304 stainless
steel plate forming the front of the arc-shaped design, and
increase operator comfort.
KENTON®
KENTON APPARATUS LTD. Was found in 1999, production plant was set
in Guangzhou,China.It is mainly engaged in production,sales and
export of laboratory thermostatic equipment and biological
scientific equipment,and has provided high-quality products and
services for professional laboratories and scientific
research.institutions at domestics and abroad for many years.
We relies on an international professional R & D team to keep
the design and technology of products in step with the world and
constantly seek breakthroughs.
Since its establishment, the company has been focusing on
thermostatic equipment products in related fields. Now it is a
high-tech enterprise integrating science, industry and trade. Its
business covers China, Southeast Asia, America, Europe, Australia
and other countries.
At the same time, based on the business philosophy of "walking with
scientific researchers", and taking advantage of the company's
geographical advantages, the company has carried out extensive
communication and exchange with scientific researchers in different
regions for many years, and carried out long-term follow-up
services to users, constantly improving the function and quality of
products, so that products can meet the requirements of users.
http://www.kentonchina.com E-mail: kenton@kentonchina.com
Adds:No.6, Tongxing street, Daxiang industrial zone, Renhe town,
Baiyun district, Guangzhou China
Tel:86-020-36246586, 36247961, 36246650, 36246651
|
