PE PVDF Nano Aluminum Composite Panel Anticorrosive Fading Resistance

Nano Self Cleaning Function PE Pvdf Acp Sheet ACM Sheet Aluminum Composite Panels

Nano Aluminum Composite Panel:

By combining the new Nano Technology with the traditional production technology of ACP, Xinghe develops the innovative Nano coating Aluminum Composite Panel. Nano ACP itself has the self-cleaning function so dirt can not attach onto it easily, it will give the building a consistently new look and can lower your maintenance costs a lot.

Nano ACP is available in Nano PVDF ACP and Nano Polyester ACP. Nano PVDF is 3-layer coating, while Nano Polyester is 2-layer coat. And Nano ACP would look more glossy and shiny than Non-Nano ACP owning to the applied of Nano clear paint on top.

Nano Aluminum Composite Panel

Nano aluminum composite panel has the advantages of traditional fluorocarbon aluminum composite panel, such as peeling resistance, corrosion resistance, fading resistance. However, it is superior to the traditional fluorocarbon aluminum composite panel in many aspect such as stain resistance, self cleaning, acid and alkali resistance due to the high-tech nano coating technology

Excellent Self-cleaning Properties

When nano aluminum composite panel is compared to ordinary acp panels, we found that its surface has excellent self-cleaning properties. Usually after half an year, the ordinary aluminum composite panel wall surface pollution is serious due to dust and rain.

Especially when the poor quality assurance silicone sealant used in some projects have been immersed in rain for a long time, and a large amount of black ink is discharged from the joints, which is not only difficult to clean, but also seriously affects the appearance of the wall.

Now the nano aluminum composite panel has greatly solved this problem. Because its tension of the coating is extremely low, which made the stain much difficult to attach. Thus, a small amount of dirt can be removed by rinsing with rain water, which can achieve self-cleaning effect. Which save the owner a lot of cleaning and maintenance costs each year.

Identification Method of Nano aluminum composite panel

The simplest identification method of nano aluminum composite material is to apply oil-based pen to the surface. If there is no trace after wiping then must be nano acp panels, the scratches of ordinary aluminum composite panel are difficult to erase.

Panel thickness: 3-6mm, recommended 4mm.

Board width: 1000-1575mm, recommended 1220mm, 1250mm, 1500mm.

Board length: up to 5800mm, recommended 2440mm, 3050mm, 4050mm

Material selection

Aluminum panel substrate: high strength aluminum alloy coil

Core material: non-toxic low density polyethylene

Surface coating: fluorocarbon nano-coating

The principle of nano acm panels:

A self-cleaning protective layer is sprayed on the surface of the fluorocarbon coating, which can be separated from contaminants such as ash layer and decompose organic pollutants in the atmosphere to achieve self-cleaning effect.