MSP430FR2476TRHBR FRAM Microcontroller IC 16-Bit 16MHz 64.5KB
(64.5K X 8) FRAM 32-VQFN (5x5)DescriptionMSP430FR247x microcontrollers (MCUs) are part of the MSP430™ MCU
value line portfolio of ultra-low-power low-cost devices for
sensing and measurement applications. MSP430FR247x MCUs integrate a
12-bit SAR ADC and one comparator. The MSP430FR247x MCUs support an
extended temperature range from –40°C up to 105°C, so higher
temperature industrial applications can benefit from the devices'
FRAM data-logging capabilities. MSP430FR247x MCUs are supported by an extensive hardware and
software ecosystem with reference designs and code examples to get
your design started quickly. Development kits include the
MSP-TS430PT48 48-pin target development board. TI also provides
free MSP430Ware™ software, which is available as a component of
Code Composer Studio™ IDE desktop and cloud versions withinTI
Resource Explorer. MSP430 MCUs are also supported by extensive
online collateral, such as our housekeeping example series, MSP
Academy training, and online support through the TI E2E™ support
forums.The MSP430 ultra-low-power (ULP) FRAM microcontroller platform
combines uniquely embedded FRAM and a holistic ultra-low-power
system architecture, allowing system designers to increase
performance while lowering energy consumption. FRAM technology
combines the low-energy fast writes, flexibility, and endurance of
RAM with the nonvolatile behavior of flash.The TI MSP430 family of low-power microcontrollers consists of
devices with different sets of peripherals targeted for various
applications. The architecture, combined with extensive low-power
modes, is optimized to achieve extended battery life in portable
measurement applications. The MCU features a powerful 16-bit RISC
CPU, 16-bit registers, and constant generators that contribute to
maximum code efficiency. The digitally controlled oscillator (DCO)
allows the MCU to wake up from low-power modes to active mode in
less than 10 µs (typical). Features• Embedded microcontroller– 16-bit RISC architecture– Clock supports frequencies up to 16 MHz– Wide supply voltage range from 3.6 V down to 1.8 V (minimum
supply voltage is restricted by SVS levels, see the SVS
specifications)• Optimized ultra-low-power modes– Active mode: 135 µA/MHz (typical)– Standby: LPM3.5, real-time clock (RTC) counter with 32768-Hz
crystal: 660 nA (typical)– Shutdown (LPM4.5): 37 nA without SVS• Low-power ferroelectric RAM (FRAM)– Up to 64KB of nonvolatile memory– Built-in error correction code (ECC)– Configurable write protection– Unified memory of program, constants, and storage– 1015 write cycle endurance– Radiation resistant and nonmagnetic• Intelligent digital peripherals– Four 16-bit timers with three capture/compare registers each
(Timer_A3)– One 16-bit timer with seven capture/compare registers (Timer_B7)– One 16-bit counter-only RTC– 16-bit cyclic redundancy check (CRC)• Enhanced serial communications with support for pin remap feature– Two eUSCI_A supports UART, IrDA, and SPI– Two eUSCI_B supports SPI and I2C• High-performance analog– One 12-bit analog-to-digital converter (ADC) with up to 12
channels• Internal shared reference (1.5, 2.0, or 2.5 V)• Sample-and-hold 200 ksps– One enhanced comparator (eCOMP)• Integrated 6-bit DAC as reference voltage• Programmable hysteresis• Configurable high-power and low-power modes• Clock system (CS)– On-chip 32-kHz RC oscillator (REFO) with 1 µA support– On-chip 16-MHz digitally controlled oscillator (DCO) with
frequency-locked loop (FLL)• ±1% accuracy with on-chip reference at room temperature– On-chip very low-frequency 10-kHz oscillator (VLO)– On-chip high-frequency modulation oscillator (MODOSC)– External 32-kHz crystal oscillator (LFXT)– Programmable MCLK prescalar of 1 to 128– SMCLK derived from MCLK with programmable prescalar of 1, 2, 4,
or 8• General input/output and pin functionality– 43 I/Os on LQFP-48 package– 43 interrupt pins on all GPIOs can wake MCU from low-power modes• Development tools and software– Development tools• Target development board MSP‑TS430PT48A• LaunchPad™ development kit LP‑MSP430FR2476• Family members (also see Device Comparison)– MSP430FR2476: 64KB of program FRAM, 512B of information FRAM, 8KB
of RAM– MSP430FR2475: 32KB of program FRAM, 512B of information FRAM, 6KB
of RAM• Package options– 48-pin: LQFP (PT)– 40-pin: VQFN (RHA)– 32-pin: VQFN (RHB) Applications• Small form factor industrial sensors• Low-power medical, health, and fitness• Battery packs• EPOS• Appliances• Thermostats• Electric toothbrushes• PC accessories Clock Distribution Block Diagram specification of MSP430FR2476TRHBR | Category | Integrated Circuits (ICs)
Embedded
Microcontrollers | Series | MSP430™ FRAM | Core Processor | | Core Size | 16-Bit | Speed | | Connectivity | I²C, IrDA, SCI, SPI, UART/USART | Peripherals | Brown-out Detect/Reset, POR, PWM, WDT | Number of I/O | | Program Memory Size | 64.5KB (64.5K x 8) | Program Memory Type | | RAM Size | | Voltage - Supply (Vcc/Vdd) | | Data Converters | | Oscillator Type | | Operating Temperature | | Mounting Type | | Package / Case | | Supplier Device Package | |
ORIGINAL Our company ensures that each batch of products comes from the
original factory, and can provide original labels and professional
testing agency reports. PRICE We provide a variety of quotation channels, and sign the order
contract after negotiation. TRANSACTION After communication and agreement, we will guide you to arrange
payment. DELIVERY CYCLE Delivery on the same day, generally 5-12 working days, may be
slightly delayed during the epidemic, we will follow up the whole
process. TRANSPORT We will choose the appropriate transportation mode according to
your country. PACKAGING After communication with you, we will choose the appropriate
packaging method according to the weight of the goods to ensure the
safe delivery of the goods. |
