TQFP-100 16Bit Flash Microcontrollers Graphics Controller PIC24FJ256DA210-IPT
|
Detailed Product Description
|
PIC24FJ256DA210-IPT 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)
Graphics Controller Features: • Three Graphics Hardware Accelerators to Facilitate Rendering of Block Copying, Text and Unpacking of Compressed
Data • Color Look-up Table (CLUT) with Maximum of 256 Entries • 1/2/4/8/16 bits-per-pixel (bpp) Color Depth Set at Run Time • Display Resolution Programmable According to Frame Buffer: - Supports direct access to external memory on devices with EPMP - Resolution supported is up to 480x272 @ 60 Hz, 16 bpp; 640x480 @
30 Hz, 16 bpp or 640x480 @ 60 Hz, 8 bpp • Supports Various Display Interfaces: - 4/8/16-bit Monochrome STN - 4/8/16-bit Color STN - 9/12/18/24-bit Color TFT (18 and 24-bit displays are connected as
16-bit, 5-6-5 RGB color format) Universal Serial Bus Features: • USB v2.0 On-The-Go (OTG) Compliant • Dual Role Capable – Can act as either Host or Peripheral • Low-Speed (1.5 Mbps) and Full-Speed (12 Mbps) USB Operation in
Host mode • Full-Speed USB Operation in Device mode • High-Precision PLL for USB • Supports up to 32 Endpoints (16 bidirectional): - USB module can use the internal RAM location from 0x800 to 0xFFFF
as USB endpoint buffers • On-Chip USB Transceiver with Interface for Off-Chip Transceiver • Supports Control, Interrupt, Isochronous and Bulk Transfers • On-Chip Pull-up and Pull-Down Resistors Peripheral Features: • Enhanced Parallel Master Port/Parallel Slave Port (EPMP/PSP), 100-pin devices only: - Direct access from CPU with an Extended Data Space (EDS)
interface - 4, 8 and 16-bit wide data bus - Up to 23 programmable address lines - Up to 2 chip select lines - Up to 2 Acknowledgement lines (one per chip select) - Programmable address/data multiplexing - Programmable address and data Wait states - Programmable polarity on control signals • Peripheral Pin Select: - Up to 44 available pins (100-pin devices) • Three 3-Wire/4-Wire SPI modules (supports 4 Frame modes) • Three I2C™ modules Supporting Multi-Master/Slave modes and
7-Bit/10-Bit Addressing • Four UART modules: - Supports RS-485, RS-232, LIN/J2602 protocols and IrDA® • Five 16-Bit Timers/Counters with Programmable Prescaler • Nine 16-Bit Capture Inputs, each with a Dedicated Time Base • Nine 16-Bit Compare/PWM Outputs, each with a Dedicated Time Base • Hardware Real-Time Clock and Calendar (RTCC) • Enhanced Programmable Cyclic Redundancy Check (CRC) Generator • Up to 5 External Interrupt Sources
|
| Product Tags: 16Bit Flash Microcontrollers Graphics Controller TQFP-100 Flash Microcontrollers Graphics Controller PIC24FJ256DA210-IPT |
Related Products
|
AT89C2051-24PU Electronic IC Chip NEW AND ORIGINAL STOCK |
|
MC9S08GT32ACFBE Flash Memory IC NEW AND ORIGINAL STOCK |
|
MC9S08AC60CFGE Flash Memory IC NEW AND ORIGINAL STOCK |
|
MC9S08AW32CFGE Flash Memory IC NEW AND ORIGINAL STOCK |
|
MC9S08AW32CPUE Flash Memory IC NEW AND ORIGINAL STOCK |
|
MC68332GCAG16 Flash Memory IC NEW AND ORIGINAL STOCK |
Email to this supplier