IR2153PBF Integrated Circuit IC Chip Self-Oscillating Half-Bridge Driver

SN5406, SN5416, SN7406, SN7416

HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS

• Convert TTL Voltage Levels to MOS Levels
• High Sink-Current Capability
• Input Clamping Diodes Simplify System Design
• Open-Collector Drivers for Indicator Lamps and Relays
• Inputs Fully Compatible With Most TTL Circuits

description

These TTL hex inverter buffers/drivers feature high-voltage open-collector outputs for interfacing with high-level circuits (such as MOS) or for driving high-current loads (such as lamps or relays), and also are characterized for use as inverter buffers for driving TTL inputs. The SN5406 and SN7406 have minimum breakdown voltages of 30 V. The SN5416 and SN7416 have minimum breakdown voltages of 15 V. The maximum sink current is 30 mA for the SN5406 and SN5416, and 40 mA for the SN7406 and SN7416.

absolute maximum ratings over operating free-air temperature (unless otherwise noted)†

Supply voltage, V_CC (see Note 1)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V

Input voltage, V_I (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V

Output voltage, V_O (see Notes 1 and 2): SN5406, SN7406  . . . . . . . . . . . . . . . . . . . . . . . . . 30 V

                                                                SN5416, SN7416  . . . . . . . . . . . . . . . . . . . . . . . . . 15 V

Package thermal impedance, θ_JA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . 86°C/W

                                                                          N package  . . . . . . . . . . . . . . . . . . . . . . . 80°C/W

                                                                          NS package  . . . . . . . . . . . . . . . . . . . . . . 76°C/W

Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. Voltage values are with respect to network ground terminal.

2. This is the maximum voltage which should be applied to any output when it is in the off state.

3. The package thermal impedance is calculated in accordance with JESD 51-7.

logic diagram (positive logic)

schematic (each buffer/driver)

Stock Offer (Hot Sell)