AD704JN Quad Picoampere Input Current Bipolar Op Amp
|
|
Quad Picoampere Input Current Bipolar Op Amp AD704
FEATURES CONNECTION DIAGRAMS High DC Precision 75 mV max Offset Voltage 1 mV/8C max Offset Voltage Drift 150 pA max Input Bias Current 0.2 pA/8C typical IB Drift Low Noise 0.5 mV p-p typical Noise, 0.1 Hz to 10 Hz Low Power 600 mA max Supply Current per Amplifier Chips & MIL-STD-883B Processing Available Available in Tape and Reel in Accordance with EIA-481A Standard Single Version: AD705, Dual Version: AD706 PRIMARY APPLICATIONS Industrial/Process Controls Weigh Scales ECG/EKG Instrumentation Low Frequency Active Filters
PRODUCT DESCRIPTION The AD704 is a quad, low power bipolar op amp that has the low input bias current of a BiFET amplifier but which offers a significantly lower IB drift over temperature. It utilizes Superbeta bipolar input transistors to achieve picoampere input bias current levels (similar to FET input amplifiers at room temperature), while its IB typically only increases by 5× at +125°C (unlike a BiFET amp, for which IB doubles every 10°C resulting in a 1000× increase at +125°C). Furthermore the AD704 achieves 75 µV offset voltage and low noise characteristics of a precision bipolar input op amp.
Since it has only 1/20 the input bias current of an AD OP07, the AD704 does not require the commonly used “balancing” resistor. Furthermore, the current noise is 1/5 that of the AD OP07 which makes the AD704 usable with much higher source impedances. At 1/6 the supply current (per amplifier) of the AD OP07, the AD704 is better suited for today’s higher density circuit boards and battery powered applications. The AD704 is an excellent choice for use in low frequency active filters in 12- and 14-bit data acquisition systems, in precision instrumentation, and as a high quality integrator. The AD704 is internally compensated for unity gain and is available in five performance grades. The AD704J and AD704K are rated over the commercial temperature range of 0°C to +70°C. The AD704A and AD704B are rated over the industrial temperature of –40°C to +85°C. The AD704T is rated over the military temperature range of –55°C to +125°C and is available processed to MIL- STD-883B, Rev. C.
NOTES 1 Bias current specifications are guaranteed maximum at either input. 2 Input bias current match is the maximum difference between corresponding inputs of all four amplifiers. 3 CMRR match is the difference of ∆VOS/∆VCM between any two amplifiers, expressed in dB. 4 PSRR match is the difference between ∆VOS/∆VSUPPLY for any two amplifiers, expressed in dB. 5 See Figure 2a for test circuit. All min and max specifications are guaranteed. Specifications subject to change without notice.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: low voltage power mosfet hybrid inverter circuit |
|
AD8552ARUZ Electronic IC Chip NEW AND ORIGINAL STOCK |
|
BA10358F-E2 Electronic IC Chip NEW AND ORIGINAL STOCK |
|
BA14741F-E2 Electronic IC Chip NEW AND ORIGINAL STOCK |
|
DRV602PWR Flash Memory IC NEW AND ORIGINAL STOCK |
|
OPA335AIDR Electronic IC Chips SINGLE-SUPPLY CMOS OPERATIONAL AMPLIFIERS |
|
OP90GSZ-REEL7 Electronic IC Chips Low-Voltage Operational Amplifier |