LT1354CN8#PBF Electronic IC Chips 12MHz, 400V/us Operational Amplifier

LT1354

12MHz, 400V/µs Op Amp

FEATURES

■ 12MHz Gain-Bandwidth

■ 400V/µs Slew Rate

■ 1.25mA Maximum Supply Current

■ Unity Gain Stable

■ C-LoadTM Op Amp Drives All Capacitive Loads

■ 10nV/√Hz Input Noise Voltage

■ 800µV Maximum Input Offset Voltage

■ 300nA Maximum Input Bias Current

■ 70nA Maximum Input Offset Current

■ 12V/mV Minimum DC Gain, RL=1k

■ 230ns Settling Time to 0.1%, 10V Step

■ 280ns Settling Time to 0.01%, 10V Step

■ ±12V Minimum Output Swing into 500Ω

■ ±2.5V Minimum Output Swing into 150Ω

■ Specified at ±2.5V, ±5V, and ±15V

APPLICATIONS

■ Wideband Amplifiers

■ Buffers

■ Active Filters

■ Data Acquisition Systems

■ Photodiode Amplifiers

DESCRIPTION

The LT® 1354 is a low power, high speed, high slew rate operational amplifier with outstanding AC and DC performance. The LT1354 has much lower supply current, lower input offset voltage, lower input bias current, and higher DC gain than devices with comparable bandwidth. The circuit topology is a voltage feedback amplifier with the slewing characteristics of a current feedback amplifier. The amplifier is a single gain stage with outstanding settling characteristics which makes the circuit an ideal choice for data acquisition systems. The output drives a 500Ω load to ±12V with ±15V supplies and a 150Ω load to ±2.5V on ±5V supplies. The amplifier is also stable with any capacitive load which makes it useful in buffer or cable driver applications.

The LT1354 is a member of a family of fast, high performance amplifiers using this unique topology and employing Linear Technology Corporation’s advanced bipolar complementary processing. For dual and quad amplifier versions of the LT1354 see the LT1355/LT1356 data sheet. For higher bandwidth devices with higher supply current see the LT1357 through LT1365 data sheets. Singles, duals, and quads of each amplifier are available.

TYPICAL APPLICATION

ABSOLUTE MAXIMUM RATINGS

Total Supply Voltage (V+ to V–) ............................... 36V

Differential Input Voltage (Transient Only, Note 1)... ±10V

Input Voltage ............................................................±VS

Output Short-Circuit Duration (Note 2) ............ Indefinite

Operating Temperature Range ................ –40°C to 85°C

Specified Temperature Range (Note 6) ... –40°C to 85°C

Maximum Junction Temperature (See Below)

    Plastic Package ................................................ 150°C

Storage Temperature Range ................. –65°C to 150°C

Lead Temperature (Soldering, 10 sec).................. 300°C

PACKAGE/ORDER INFORMATION

Stock Offer (Hot Sell)