Two Input Signals SOP24 Dual Dc Motor Driver TB6612FNG
|
TB6612FNG SSOP-24 Dual DC Motor Controller Driver IC With Two input signals
Description
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse). This little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
Features
|
Product Tags: SOP24 Dual Dc Motor Driver TB6612FNG SOP Dual Dc Motor Driver |
![]() |
SST26VF032B-104I/MF FLASH Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-WDFN (5x6) |
![]() |
SST26VF032B-104I/MF Flash Memory Chip IC Micro 32 Mbit Low Power Consumption |
![]() |
LPC1768FBD100K MCU Chips IC MCU 32BIT 512KB FLASH 100LQFP 32 BIT Micro Controllers |
![]() |
EPCS16SI8N NEW AND ORIGINAL STOCK |
![]() |
Professional Flash Memory Products Ic Memory Chip XCF08PVOG48C |
![]() |
M45PE10-VMN6P Flash Memory IC NEW AND ORIGINAL STOCK |