CD74HCT541M96 Programmable Logic ICS Buffers & Line Drivers Tri-St N-Invrt Octal

CD74HCT541M96 Programmable Logic ICS Buffers & Line Drivers Tri-St N-Invrt Octal

Features

• ’HC540, CD74HCT540 . . . . . . . . . . . . . . . . . . . Inverting

• ’HC541,’HCT541...................... Non-Inverting

• Buffered Inputs

• Three-State Outputs

• Bus Line Driving Capability

• Typical Propagation Delay = 9ns at VCC = 5V, CL = 15pF, TA = 25oC

• Fanout (Over Temperature Range)

  • - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads

  • - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads

• Wide Operating Temperature Range . . . -55oC to 125oC

• Balanced Propagation Delay and Transition Times

• Significant Power Reduction Compared to LSTTL Logic ICs

• HC Types

  • - 2V to 6V Operation

  • - High Noise Immunity: NIL = 30%, NIH = 30% of VCC

    at VCC = 5V

• HCT Types

  • - 4.5V to 5.5V Operation

  • - Direct LSTTL Input Logic Compatibility,

    VIL= 0.8V (Max), VIH = 2V (Min)

  • - CMOS Input Compatibility, Il ≤ 1μA at VOL, VOH

Description

The ’HC540 and CD74HCT540 are Inverting Octal Buffers and Line Drivers with Three-State Outputs and the capability to drive 15 LSTTL loads. The ’HC541 and ’HCT541 are Non- Inverting Octal Buffers and Line Drivers with Three-State Out- puts that can drive 15 LSTTL loads. The Output Enables (OE1) and (OE2) control the Three-State Outputs. If either OE1 or OE2 is HIGH the outputs will be in the high imped- ance state. For data output OE1 and OE2 both must be LOW.

Ordering Information