BT93420 Temperature Indicator Transmitter for Accurate Oil
Temperature Measurement PT100
BT93420 Temperature Indicator Transmitter
Introduction of temperature induicator transmitter:
BT93420-I temperature indicating transmitter adopts a special
temperature module or PCB, which can perform linear correction for
various thermocouples and resistance temperature detector (rtd),
with high accuracy, good stability, strong anti-interference
ability, waterproof, explosion-proof design, high temperature
resistance, impact resistance and other characteristics. It can be
integrated with the control system to realize automatic temperature
control and monitoring. The temperature transmitter module is a 24V
power supply, two-wire integrated transmitter. Temperature
transmitter products use imported integrated circuits to amplify
thermistor or thermocouple signals and convert them into 4-20mA or
0-10mA output current, or 0 ~ 5V output voltage. Armored
transmitters can directly measure the temperature of gas or liquid,
especially for low temperature range measurement, to overcome the
effect of condensation water on temperature measurement.
Product Features of temperature induicator transmitter: - Full stainless steel structure, good corrosion resistance
- Analog output and digital output are both available for selection
- Terminal box, 2088 LCD, or LED display are available for selection
Applications of temperature induicator transmitter:- Monitor the temperature of generators, transformers, cables, and
other critical equipment.
- Industrial Automation.
- Temperature measurement of various gases or liquids in pipelines in
industries such as petroleum, chemical, power, and hydrology.
| Performance Parameters of temperature induicator transmitter |
| Measurement Range | -55~1200ºC |
| Accuracy @ 25ºC | ±0.5% (Typ.) ±1% (Max.) |
| Repeatability | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Hysteresis | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Long-Term Stability | ±0.2%F.S/year (Max.) |
| Operating Temperature | -30~80ºC |
| Storage Temperature | -40~100ºC |
| Housing Material | 1Cr18Ni9Ti |
| Diaphragm Material | 316L Stainless Steel |
| Insulation Resistance | >=100MΩ@100VDC |
| Maximum temperature | 120% of the rated temperature range |
| Protection Rating | IP65 |
| Weight | ~0.5Kg |
| Outline Construction of temperature induicator transmitter |
| Terminal Box |
|
| Order Guide |
| BT93420 | Temperature Indicator Transmitter |
| | Code | Outline Construction |
| I | Blue Terminal Box |
| II | 2088 housing |
| III | 2088+LED |
| IIIA | 3051+LED |
| | Measurement Range | -55~1200ºC |
| | Code | Power Supply |
| D1 | 24VDC |
| D2 | Other |
| | Code | Output Signal |
| S1 | 4~20mADC | S4 | 0~10mADC |
| S2 | 1~5VDC | S5 | 0~20mADC |
| S3 | 0~5VDC | S6 | 0~10VDC |
| | Code | Pressure Connection |
| J1 | M27X2 Male |
| J2 | Other |
| | Code | Insertion depth |
| L | Actual insertion depth |
