USB Interior Dash Camera Intelligent High Definition DMS Camera

USB Dash Camera Bus interior high-definition monitoring with 1080PUSB camera

DMS camera driver behavior recognition camera in car camera
An intelligent driving assistance system device based on image recognition technology .  This technology not only enables real  - time status monitoring and voice warning of unsafe behaviors such as fatigue driving    distracted driving   lane deviation    close range of preceding vehicles   pedestrians in blind spots   and dumping of debris trucks and cargo boxes   but also cooperates with monitoring driving platforms for data uploading and adjustment intervention  . This prompts drivers to drive in a standardized manner   providing them with more proactive and intelligent safety measures    and reducing the incidence of accidents .

1 .  DMS camera installation
DSM cameras can detect and alert unsafe driving behaviors .  By detecting changes in the eyes and face   identify all unsafe driving behaviors of the driver while driving   and provide corresponding voice prompts accordingly 
Unsafe driving behaviors include :
a .  Fatigue :  yawning   closing eyes
b .  Make a phone call
c . Distracted driving :  looking left and right  looking down
d .  Smoking
e .  Driver anomaly :  The driver has left the driver's line of sight
The selection of installation location for DMS cameras should be based on the following principles :

Installation location :  It is recommended to install it on the center console or instrument panel, as shown in Figure 1
Installation angle :  It is recommended to ensure that the angle is within 30 ° to the right in front of the driver   and the smaller the angle   the better    as shown in Figure 2
Installation distance :  The distance between the camera and the face ranges from 60cm to 120cm  and it is recommended to install it at a position of about 80cm
Ensure that the face is in the center of the DMS camera (can be confirmed through the mobile app)
Ensure that the DMS camera does not obstruct the driver's line of sight or interfere with the driver's vision

Ensure that the distance between the DMS camera and the driver's face is not obstructed by other debris such as the steering wheel
The DMS camera needs to be kept horizontal on both sides and cannot be tilted .
Under the above conditions   the smaller the deviation angle between the DMS camera and the driver's front face   the better   and it is best to face the driver directly
DAS camera