Factory Soap Lotion Pump Cap Liquid Dispenser Customized Soap Body Pumps

How to use a soap lotion pump cap:

Prepare the Bottle: Ensure that the bottle containing the soap or lotion is securely closed and positioned upright on a stable surface. The pump cap should be securely attached to the bottle.

Prime the Pump: If it’s the first time using the pump or if it has been unused for a while, you may need to prime the pump. To do this, press the pump head down several times until the product begins to dispense. This helps to remove any air from the pump and ensure smooth dispensing.

Dispense the Product:

Press down on the pump head with your hand or fingers. Apply gentle pressure to avoid splashing or excessive dispensing.

The pump will dispense a pre-measured amount of soap or lotion with each full press. Adjust the amount of pressure on the pump head based on the desired amount of product needed.

Use the Dispensed Product: Once the product is dispensed onto your hand or desired surface, use it as needed. For soap, lather with water and rinse thoroughly. For lotion, massage into the skin until absorbed.

Close and Store: After use, release the pressure on the pump head to stop dispensing. Ensure the pump head is closed securely to prevent leakage or contamination. Store the bottle in a cool, dry place away from direct sunlight.

for Optimal Use:

Keep the pump and nozzle clean to maintain hygiene. Wipe down the pump head and nozzle regularly with a clean cloth or tissue.

Avoid overfilling the bottle to prevent leakage when using the pump cap.

If the pump becomes clogged, clean it by running warm water through it or using a pin to remove any blockages.

Product Description :