LE910-NA1 4G LTE Module Storage Multifunctional Cat. 1 modules

LE910-NA1 4G LTE Module

Telit LE910-NA1 LGA Module belongs to LE910 Series of Cat. 1 modules, which are optimized for LTE low category networks and are available in single mode and 3G fallback options. In addition to VoLTE support, the LE910Cat.1 series are swappable with other modules in the xE910 family.

Telit LE910-NA1 delivers 4G radio access technology in the 28.2 x 28.2 x 2.2 mm family form factor and supports downlink up to 10Mbps and uplink up to 5Mbps. It has a brother model Telit LE910B1-NA which supports same LTE bands for AT&T carrier in USA and VoLTE is available.

Telit LE910-NA1 module Specs:

* Telit LTE Cat.1 module

* Target market: North America (AT&T, T-Mobile)

* Support 4G Frequency bands(MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700)

* Support 3G Bands: B2(1900), B5(850)

* Support 2G Bands: No

* VoLTE: NO

* LTE FDD Cat.1, 3GPP release 9 compliant

* Rx Diversity and MIMO DL 2x2

* SIM application Tool Kit 3GPP TS 51.014

* Serial port multiplexer 3GPP TS27.010

* SMS over IMS

* Built in UDP/TCP/FTP/SMTP stack

* Control via AT commands according to 3GPP TS 27.005, 27.007 and Telit Custom AT commands

* Data rates: Uplink up to 5 Mbps, Downlink up to 10 Mbps

* Interfaces
- 144-pin LGA Interface
- 10 I/O ports (@1.8V) including multifunctional I/Os
- USB 2.0 HS
- UART
- 1.8 V / 3 V SIM interface
- RF pad, RX Div. & MIMO pad

* Output power
- Class 3 (0.2 W, 23 dBm) @ LTE
- Class 3 (0.25 W, 23 dBm) @ 3G
- Class 4 (2W) @ GSM 900
- Class 1 (1W) @ DCS 1800

* Supply voltage
- Nominal: 3.8 VDC
- Range: 3.3 - 4.2 VDC

* Software and Application Development/AppZone application resources
- Programming language: C
- IDE: Eclipse
- Dedicated File System: 5 MB
- Separate App. RAM Space: 2 MB

* Operating and Storage Temperature Range: -40°C to +85°C

* REACH and RoHS compliant

* Dimensions 28.2 x 28.2 x 2.2 mm

* Approvals
- FCC/IC, PTCRB, GCF (North America)
- R&TTE/GCF (Europe)
- Radio/Telecom Biz Act (Japan)