LDX-020A Carbide Saw Blade Grinding Machine Manufacturer

LDX-020A Carbide Saw Blade Grinding Machine Manufacturer

Do TCT saw blades need a fully automatic grinder:

1,TCT saw blade as an industrial consumable, sawing for a long time, there will be many problems: such as blunt head, cutting is not sharp enough; There are lines and burrs on the surface of the cutting workpiece, and the material loss is larger; The sawing sound is noisy and uneven; The serrations are not sharp causing the cut to be smoky and so on

2,Because the cutting workpiece requirements are relatively high, worried about the quality of the workpiece cut out after the alloy saw blade grinding, so adhere to the principle of only buying new films, saw blades never grinding, which makes the customer's sawing cost is very high; Some customers complained to us that the saw blade had been polished in other manufacturers before.

3,But it is not that your cutting requirements are high, nor is it really bad to use the alloy saw blade after grinding, but you did not find the right manufacturer, this is the key! Alloy saw blade after professional factory grinding, it can be used as a new film, help you reduce the sawing cost by more than 50%!

Allowance allocation is the key link to ensure the smooth grinding process and reach the predetermined accuracy. Here are some basic principles and methods of margin allocation:

1,The total grinding allowance is determined according to the initial state of the workpiece and the target accuracy.

2,The total allowance is allocated reasonably to each grinding stage, ensuring that each stage can effectively remove a certain amount of material, while avoiding excessive grinding resulting in workpiece damage.

3,Considering the wear of the grinding wheel, adjust the grinding allowance and grinding parameters in time to ensure the stability and continuity of the grinding process.

4,The in-machine measurement system is used to monitor the grinding process in real time and adjust the allowance allocation according to the measurement results to achieve accurate control.