Shaft Size 12mm Horizontal Type CM1/3/5 Pump
(Material:SiC/SiC/Viton)
Shaft size 16mm Horizontal Type CM10/15/25 Pump
(Material:SiC/SiC/Viton) Suitable for CR, CRN, and CRI series Pumps Temperature | -30ºC to 200ºC, Dependent on the elastomer | Pressure | Up to 10 bar | Speed | Up to 15 m/s | End play/axial float allowance | ±0.1mm | Size | 12mm to 16mm | Brand | JR | Face | SiC | Seat | SiC | Elastomer | NBR, EPDM, VITON | Spring | SS304, SS316 | Metal parts | SS304, SS316 |
HHHHNNNNNNNNNN Description:
Gr0ndf0s CR Replacement Cartridge Mechanical Seals
Standard Shaft Size:12mm,16mm Temperature | -30ºC to 200ºC, dependent on the elastomer | Pressure | Up to 10 bar | Speed | Up to 15 m/s | End play/axial float allowance | ±0.1mm | Size | 12MM 16MM | Brand | YUEMI | Face | Carbon, SiC, TC | Seat | Ceramic, SiC, TC | Elastomer | NBR, EPDM, FKM etc. | Spring | SS304, SS316 | Metal parts | SS304, SS316 | Idividual Packing | Using foam and plastic paper wrapped, then put one piece of seal in
one box,finally put in standard export carton. |
Operating Range:
Cartridge Pump Seal for Grondfos(mechanical seal, pump seal)
Description:
Equivalent with type H.
Shaft size: 12MM,16MM
Balanced, cartridge O-ring seal unit with rigid torque transmission
system
This seal type is assembled in a cartridge unit which makes
replacement safe and easy.
Similar to the type D seal, the balancing makes this O-ring seal
type suitable for high-pressure applications.
Material:
Rotary Ring: SiC/TC
Stationary Ring: SiC/TC
Elastomers: NBR/Vit
Springs: SS304/SS316
Metal Parts: 410S/SS304/SS316
Mediums: water, oil, sewage, weak acid, weak alkali, and other weak
corrosive mediums.
Customization: Changes of materials for getting other operating
parameters are possible. Contact us with your requirements.
|
