55CM 60CM SC UPC APC Optical Fiber Field-assembled Connector
Easy operating, The connector can be directly used in ONU,
also with fasten strength more than 5 kg, it is widely used in
FTTH project of network revolution. It also reduce the use of
sockets and adapters, save cost of project. With 86
standard socket and adapter, the connector makes connection
between drop cable and patch cord. The 86 standard socket
provides completeprotection with its unique design.
Specification:
| Cable Scope | ① 3.0 x 2.0 mm bow-type drop cable
② 2.0 x 1.6 mm drop cable
③Φ0.9mm fiber cable | Size | 55 x 8.7 x 8.3 mm
60 x 8.7 x 8.3 mm
without dust cap |
| Fiber Diameter | 125μm ( 652 & 657 ) | Coating Diameter | 250μm |
| Mode | SM SC/APC | Operation Time | about 15s (exclude fiber presetting) |
| Insertion Loss | ≤0.3dB (1310nm & 1550nm) | Return Loss | ≥55dB |
| Success Rate | >98% | Reusable Times | >10 times |
Features:
1.1 Quick Termination
No need for epoxy, curing, or polishing (unlike traditional
connectors).
Can be installed in 1-3 minutes with minimal tools.
1.2 Types of Connectors
SC, LC, FC, or ST styles (SC and LC are most common in FTTH).
APC (Angled Physical Contact) or UPC (Ultra Physical Contact)
polish types.
1.3 Compatibility
Works with single-mode (SM) and multimode (MM) fibers.
Supports 250µm, 900µm, or 3mm fiber coatings.
1.4 Tool Requirements
Basic tools include a fiber stripper, cleaver, and crimping tool.
Some versions are no-crimp for even faster installation.
1.5 Performance
Low insertion loss (<0.3 dB for high-quality fast connectors).
High return loss (>50 dB for APC, >40 dB for UPC).
Application:
1. Connection with field mountable indoor cable, pigtail, patch
cord and transformation of patch cord in data room and directly
used in specific ONU.
Package:
More Different Types:
