ADSS Fiber Optic Anchor Clamp 304 Stainless Steel
|
|
ADSS Fiber Optic Anchor Clamp 304 Stainless Steel These anchoring clamps are made of an opened conical body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation. Specification:
Application: These clamps will be used as cable dead-end at end poles (using one clamp). Two clamps can be installed as double dead-end in the following cases : 1. at jointing poles 2. at intermediate angle poles when the cable route deviates by more than 20°. 3. at intermediate poles when the two spans are different in lengths 4. at intermediate poles on hilly landscapes Testing: These products have been validated according to internationally
recognised standards : 1 Climatic ageing test according to NF EN C-20-540 standard dated
June 2002. 2 Corrosion test according to NF EN 60068-2-52 dated December 1996. 3 Mechanical test according to France Telecom FT R&D/7890 dated
July 2003. 4 Vibration test according to France Telecom FT R&D/7890 dated
July 2003 and NF EN 50289-3-13 dated August 2003. 5 Insertion loss < 0.2 dB. Our Package: Production Flow: More Related Products: |
||||||
| Product Tags: stainless steel adss anchor clamp stainless steel adss suspension clamp uv adss anchor clamp |
|
UV Resistant Plastic Aluminum ADSS Anchor Clamp for FTTH FTTX FTTB Network |
|
Insulating Nylon PA66 ADSS Fiber Wedge Dead End Clamp 11-14mm |
|
Thermo Plastic ADSS Cable Anchor Dead-end Clamp UV Protected For 4-8 mm |
|
ADSS Fiber Optic Anchor Clamp 304 Stainless Steel |
|
FTTH Figure 8 Cables Anchor Drop Clamp Mounting All Pole Line Hardware |
|
Fiber Optical ADSS Cable Drop Tension Clamp To Fasten And Support |