Diesel Hammer Crusher Mobile Small Hammer Crusher With Conveyor Belt

Diesel Hammer Crusher Mobile Small Hammer Crusher With Conveyor Belt

Working principle and process of hammer crusher:
The raw materials are fed into the crusher through the feed port. The feed port size is 400 mm × 300 mm, which can handle larger particles. The diesel engine in the equipment drives the hammer to rotate at high speed. The hammer hits the material through centrifugal force, so that it is quickly crushed under the action of impact and shear. After the hammer contacts the material, the material is hit, torn and crushed by the hammer, and gradually reduced to the required discharge particle size.The crushed material is automatically discharged through the ahmmer crusher discharge port. The discharge particle size is adjustable, generally 5-40 mm, to meet different processing needs.

Advantages:
Flexible power: Diesel engine driven, suitable for areas without power supply, strong mobility, not restricted by the environment and electricity.
Efficient crushing: The hammer head is reasonably designed, can quickly handle large pieces of material, and has high crushing efficiency.
Simple maintenance: The structural design is reasonable, easy to disassemble and install, easy to maintain and replace the hammer head and later hammer crushing maintenance.
Wide adaptability: It can crush a variety of materials such as ore, coal, construction waste, stone, shale, pebbles, etc., with a wide range of applications.
Reduce operating costs: Diesel engines can reduce electricity costs compared to electric motors in certain environments, especially in remote areas and environments that require mobile outdoor work

Equipment structure:
Control system: Equipped with manual or automatic control options, it is convenient for operators to manage, and different control systems are equipped according to manual or automatic.
Frame: High-strength steel is used to ensure the stability and durability of the equipment.
Diesel engine: Provides power, usually with a power of 15 kW, which can meet the operating requirements of the crusher.
Hammer head: Cast from high manganese steel, with good wear resistance and impact toughness, generally 8 pieces.
Feed inlet: Designed to be wide to facilitate the input of large pieces of material, and equipped with protective devices.
Discharge port: Located at the bottom of the equipment, the discharge design is reasonable to ensure that the crushed material can be discharged smoothly.

Hammer curhser specification: