Jaw Crusher Machine Available Customizable Low Consumption

Jaw Crusher Machine Available At Competitive Prices And Customizable Options

Technical advantages

1. The performance is obvious, the crushing chamber is deep and there are no blind spots, which improves the feeding capacity, output, and production capacity.

2. The structure is simple, and the gasket type discharge port device is set up, which is very convenient, with a large adjustment range, reliable operation, and low operating costs.

3. The fixed jaw plate is used as the core component, so its internal structure is very reasonable, with a large crushing ratio and uniform product particle size.

4. The maintenance and upkeep of the equipment is very convenient, the lubrication system is safe and reliable, the parts are easy to replace, and the maintenance workload is small.

Equipment working principle

The crushing chamber is composed of two jaw plates, a moving jaw and a fixed jaw, to simulate the movement of the animal's two jaws and complete the material crushing operation. Widely used in industries such as mining smelting, building materials, and highways. It can be used for crushing various ores and bulk materials. The movable jaw plate performs periodic reciprocating motion on the fixed jaw plate, sometimes approaching and sometimes separating. When the jaw plate approaches, the material is crushed due to compression, splitting, and impact between the two jaw plates; When the jaw plate is separated, the already broken material is discharged from the discharge port due to gravity.

Regular maintenance

1. Regularly turn off the jaw crusher and inspect the machine. When any stone crushing equipment is turned on or off, it is important to regularly turn off the jaw crusher and inspect the internal wear of the machine, such as the wear of the central feeding pipe, cone cap, impeller upper and lower flow channel lining plates, circumferential protective plates, and wear-resistant blocks. The severely worn parts should be replaced in a timely manner and repaired. At the same time, pay attention to the weight, model, and size of the replaced parts, and be sure to replace them according to the original component parameters.

2. Regular inspection of jaw fracture transmission belt. Jaw breaking conveyor belt is an indispensable part of the stone production line, and the driving force of the machine is attributed to the conveyor belt. Regularly adjust the tightness of the conveyor belt to ensure even force distribution. When driven by dual motors, the triangular tape on both sides should be grouped and selected to ensure that the length of each group is as consistent as possible. If you find that the wear of the drive belt is too severe, please replace it in a timely manner.

3. Lubrication of mechanical components. The jaw crusher adopts special grade automotive lubricating grease or 3 lithium based grease, and an appropriate amount of lubricating grease is added every 400 working hours; Work for 2000 hours, open the spindle assembly to clean the bearings; Replace the bearings with new ones after working for 7200 hours.

In addition, to ensure the normal operation of the jaw crusher, in addition to correctly operating the jaw breaker, planned maintenance must be carried out, including daily maintenance, inspection, minor repairs, medium repairs, and major repairs.

Parameter Table