Charcoal Making Machine Smokeless Straw Bamboo Chips Sawdust Barbecue Charcoal

Charcoal Making Machine Smokeless Straw Bamboo Chips Sawdust Barbecue Charcoal

Charcoal Making Machine Process Flow
1.Wood crusher: Wood crusher is used to crush machine-made charcoal and biochar raw materials, and is widely used in production lines for machine-made charcoal, charcoal, and shisha charcoal molding. On the basis of absorbing a variety of wood crushing, it is equipped with a pulse dust collector, which is environmentally friendly and pollution-free.

2.Indirect dryer:It is specially designed and manufactured for drying sawdust, sawdust, small wood chips and veneer. It has a good drying effect on the crushed sawdust materials.

3.Sawdust rod-making machine:It is used to shape the crushed and dried wood into rods to facilitate smokeless carbonization. What is produced by the environmentally friendly sawdust rod making machine is only a semi-finished product. After carbonization, it can be widely used in home heating, barbecue food, industry and other industries.

4.Lifting Carburizing Furnace:It is one of the main products in carbonization equipment. It is highly efficient, stable and well received by users. A complete set of carbonization treatment solutions can be designed based on the raw material specifications provided by the user and the local environmental climate.

Charcoal Making Machine Application
It is a waste renewable energy fuel with a higher calorific value than charcoal of similar raw materials and higher than ordinary coal. It is smokeless, odorless, non-toxic, clean and sanitary. It can be widely used for home heating. There is a large demand in the international market for barbecue food. In industry, it can replace coal or heavy oil in steam boilers and can also be used as chemical raw materials for deep processing of activated carbon and silicon carbide. Crystalline silicon, etc. It is an essential raw material for carbon disulfide plants, mosquito coil plants, copper processing plants, and foundries.

Charcoal Making Machine Working Principle
The principle of the charcoal machine is simple and easy to understand. It is to use branches, straw, rice straw, peanut shells, tree trunks, cotton straw, tea seed shells, fruit shells, weeds, leaves, etc. that contain biomass fibers that can produce charcoal. The raw materials are filled in, crushed into a powder within 10mm by a pulverizer, dried in a dryer so that the moisture content is within 12%, and then put into a rod making machine to be shaped at high temperature and high pressure (without adding any additives). Put it into the carbonization furnace for carbonization to become the finished machine-made charcoal. The material powder can also be directly carbonized into carbon powder at high temperature using a continuous carbonization furnace.

Charcoal Making Machine Advantages

1.Simple structure: simple structure and easy installation.

2.High efficiency: easy large-diameter inlet and outlet, large processing capacity.

3.Reduce energy consumption:Easy to start,low friction, can reduce energy consumption.

Charcoal Making Machine Specification Table