Food Wood Dryer Machine Pepper Fruit Heat Pump Drying Chrysanthemum
Product introduction:
During the drying process of the dryer, the hot airflow moves
forward from the tail, fully contacts the material, and makes full
use of the heat transfer through heat conduction, convection, and
radiation; the heat energy is directly transferred to the material,
so that the moisture of the material is continuously evaporated in
the cylinder. , the air induction device at the feed inlet extracts
a large amount of water and wet air flow to prevent secondary
pollution caused by dust discharge, and can dry vegetables, fruits,
medicinal materials, wood, flowers, meat, seafood and other
principles.
Working principle:
The main principle of heat pump application in drying process is to
use the heat pump evaporator to absorb the heat energy in the
outside air, or to recover the waste heat of the exhaust gas during
the drying process, and then transfer (transfer) the energy to the
drying room through the work of the compressor. The materials in
the drying room vaporize and evaporate the moisture in the
materials through circulating hot air heat transfer. The evaporated
water vapor is drained or the cold water flows out to achieve the
purpose of drying the materials. The refrigerant after condensing
the heat is After passing through the throttle valve, it becomes a
low-temperature and low-pressure liquid. Due to the sudden drop in
pressure, the wave-like refrigerant enters the evaporator and
continuously absorbs the low-level heat energy of the surrounding
air and quickly evaporates into a gaseous state. The refrigerant
that has absorbed a certain amount of energy flows back to the
compressor and enters the evaporator. Next cycle. In this way, the
refrigerant is continuously circulated to transfer the heat in the
air to the drying room to heat the air temperature in the room.
Advantage:
1. Various hanging rails, floor rails and other hanging methods and
spraying scenarios can be customized according to customer
workpieces.
2. The fireproof and thermal insulation exterior wall rock wool
board is made of 10mm fireproof rock wool insulation board.
3. Fully electric operation, no pollution to drying materials and
external environment, greatly improving the working environment.
Dryer machine specification:
Model | FS-3P | FS-8P | FS-15P |
Capacity | 200-300kg/batch | 400-500kg/batch | 1000-1300 kg/batch |
Power | 3.5 kw | 7.5kw | 15kw |
Circulation Fan | 2kw | 3kw | 9kw |
Trolley size(mm) | 860*810*1830 | 880*1200*1830 | 880*1200*1830 |
Quantity
(set) | 4 | 6 | 15 |
Fan frame | Frame:galvanize
Panel:201SS | Frame:galvanize
Panel:201SS | Frame:galvanize
Panel:201SS |
Tray size(mm) | 430*730 | 600*800 | 600*800 |
