Split Plain Bearing Marine Mechanical Seal Customized Request Option for Customization
|
Detailed Product Description
|
The INSRON® seal researched and developed by Techemer Composites contains lubricating materials, which can protect the tail shaft of the yacht. Compared with ordinary materials, it not only has the form of grease-free self-lubrication or water-lubrication, has the characteristics of super shock resistance and impact resistance, but also has a low friction coefficient and a long service life, which is twice that of general marine product materials.  Water Pick-up Point:1. Water nozzle between the radiator and the vertical tube (as close as possible to the radiator). 2. Water nozzle between oil cooler and radiator. 3. Water nozzle between water pump and oil cooler . 4. Drain plug behind the water pump. (make sure the pressure of the pump is drainable) . 5. Radiator drain plugs . 6. Oil cooler drain plug (cooler bore at least 200 inches if cooler is under pump pressure) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Material Grade | |||||
| Bearing(lining) | INDRON®TSTN | INDRON®HRBR | INDRON®HAWF | INDRON®UNIV | INDRON®PLAT |
| Material | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers | SyntheticEngineering Elastomers | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers |
| Recommended Workplace | Guide Bearings & Seals | Guide Bearings& Seals | Guide Bearings & Seals | Guide van, connecting rod bushing | Guide vane, connecting rod bushing |
| Temperature Limit | 70℃ | 70℃ | 70℃ | 70℃ | 70℃ |
| Dry Rub | Yes | low speed | low speed | Yes | Yes |
| Acid Resistance | limit | limit | limit | limit | limit |
| Alkaline Resistant | limit | limit | limit | limit | limit |
| Hydrocarbon Suitability | Yes | Yes | Yes | Yes | Yes |
| Abrasion Resistance | good | excellent | excellent | good | good |
| Friction Pair(bushing) | bronze | HRC40 | HRC40 | HRC40 | HRC40 |
| Stainless | recommend | recommend | recommend | recommend | |
| Typical Application | water, sea water | water, sea water | water, sea water | water, sea water | water, sea water |
| Most fluids(pH 5-10) | Most fluids(pH5-10) | Most fluids(pH5-10) | Most fluids(pH 5-10) | Most fluids(pH5-10) | |
| Note | Lowest coefficient of friction,suitable for dry running applications, good wear resistance | Use silt water under moderate grinding conditions | Use ofsilt-containing water under high grinding conditions. Contains abrasion resistant | high load capacity | high load capacity |
Material Performances
| Property List of INDRON® Elastic-plastic Alloy | TSTN | CFlon | PLAT | hRBR | ||
| Properties | Unit | Test Method | Typical Value | |||
| Physical Property | ||||||
| Density | g/cm3 | GB/T 1033.1 /ISO 1183.1 | 1.16 | 2.05 | 1.23 | 1.1 |
| Mechanical Properties | ||||||
| Tensile Strength | MPa | GB/T 1040.2 /ISO 527.2 | 40.3 | 22.9 | 30 | 20.3 |
| Elongation at Break | % | GB/T 1040.2/ISO 527.2 | 300 | 560 | 150 | 421 |
| Shore Hardness | ° | GB/T 2411/ISO 868 | 62~66D | 68D | 67~76D | 85~95A |
| Water Absorption Mass (Saturated) | % | GB/T 1690/ISO 1817 | 1.2 | 1.2 | 1 | 1.2 |
| Water Absorption Volume (1080h) | % | GB/ T1690/ISO 1817 | 1.4 | 1.4 | 0.9 | 1.7 |
| Charpy Impact Strength (Notched) | kJ/㎡ | GB/T 1043.1/ISO 179.1 | 110 | 100 | 120 | — |
| Compressive Strength | MPa | GB/T 1041/ISO 604 | 24.6 | 28.8 | 38 | 3.8 |
| Modulus Compression | MPa | GB/T 1041/ISO 604 | 423 | 828 | 600 | 60 |
| Compressive Set (24h) | % | GB/T 7759/ISO 815 | 25 | — | — | 13 |
| Maximum Load Capacity (Low-speed oscilating at 25% strain ) | MPa | 26 | 25 | 38 | 5 | |
| Maximum Load Capacity (continuous operation at 25% strain ) | MPa | 10 | 10 | 20 | 3 | |
| Maximum Operation Temperature (in water) | °C | 70 | 100 | 70 | 70 | |
| Maximum Operation Temperature (Dry) | °C | 110 | 260 | 110 | 110 | |
| Tribology Property | ||||||
| Relative Volume Wear (by Rotating Cylinder Drum) | mm3 | GB/T 25262/ISO 23794 | 138 | 200 | 136 | 84 |
| Limiting PV (Seawater Cycling, Linear Speed 5.13m/s) | MPa·m/s | GB 7948-87 | 101.3 | — | — | — |
| Limiting PV (Dry Frition, Linear Speed 5.13m/s) | MPa·m/s | GB 7948-87 | 1.69 | — | 2.3 | 1 |
| Coefficient of Dynamic Friction (Water) | GB 7948-87 | 0.08-0.16 | 0.05-0.15 | 0.08-0.16 | 0.08-0.16 | |
Our laboratory is equipped with advanced material performance testing and analysis instruments, allowing us to strictly control every detail of product design and production, ensuring superior product quality. Indron® bearings, seals, and gaskets are more durable than ordinary bearing materials under various conditions, including dry friction, water lubrication (clean water or water containing sand and mud), non-lubrication, grease lubrication, and even under impact load conditions.
Material Performances
GB/T 9867, ISO 4649 and ASTM D5963 Relative Volume Wears Comparison Among (mm³)
Part of the data is abstracted from Thordon's Product Specifications
ASTM D5963 (Comparison of abrasion) (㎥)
Partial data from THORDON product description
| Graphite | |||||||||||||||||||||||||||||||||||||||||||||||
| RAILKO NF22 | |||||||||||||||||||||||||||||||||||||||||||||||
| ORKOT TLG-P/S | |||||||||||||||||||||||||||||||||||||||||||||||
| ORKOT TXM-M | |||||||||||||||||||||||||||||||||||||||||||||||
| TENMAT T14 | |||||||||||||||||||||||||||||||||||||||||||||||
| TENMAT T814 | |||||||||||||||||||||||||||||||||||||||||||||||
| Polyformaldehyde(POM) DELRIN AF | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON THORPLAS | |||||||||||||||||||||||||||||||||||||||||||||||
| PTFE | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON PLAT | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON HPSXL | |||||||||||||||||||||||||||||||||||||||||||||||
| UHMWHDPE | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON SXL | |||||||||||||||||||||||||||||||||||||||||||||||
| DIN | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON TSTN | |||||||||||||||||||||||||||||||||||||||||||||||
| THORDON XL | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON TITN | |||||||||||||||||||||||||||||||||||||||||||||||
| INDRON HRBR | |||||||||||||||||||||||||||||||||||||||||||||||
| O | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | ||||||||||||||||||||||||||||||||||||||
Under the same conditions, INDRON" elastoplastic alloy has less wear than other common nonmetal bearing materials, and some of its models are even better than imported materials,which means INDRON* bearing has longer service life, higher reliability and lower maintenance cost.
What bearing materials are more suitable as the materials used for water pump guide bearings, Babbitt alloy, rubber, ceramics or new polymer materials? It is advisable to take account of the lubrication requirements, use environment and maintenance cycle of the equipment.
COMMON GUIDE BEARING MATERIALS
| Bearing type | INDRON bearing | AR bearing | Ceramic bearing | Rubber bearing | Babbitt alloy bearing |
| Characteristics | The performance is close thordon, which can use more equipment assembly methods. In addition to traditional installations by freezing and pressurizing. It can also be installed by coating reactive thermal polymerization Dx and cold sticking. | Good wear resistance and impact resistance. The bearing hardness is high; the shaft sleeve is easy to wear; the temperature difference changes greatly; there will be the risk of shelling; the price is high. | Wear-resistant, heat-resistant, corrosion-resistant, lubricated by pump circulating water, capable of dry grinding for a short time, high requirement on accuracy in processing and assembly, fragile and the most expensive. | It has a long history and mature manufacturing process, featured by wear resistance, anti-seismic, impact resistance, convenient assembly/disassembly and low price (only 20% of ceramic bearings price) | Wear resistance and impact resistance require a set of more complicated sealing and lubricating devices and mechanisms. |
| Lubricating requirements | Clean water can be used for lubrication or 150s dry start according to the material grades. | Dry start more than 180S without clean water lubrication. | It can be lubricated by pumping medium without special clean water lubrication. | Clean industrial water | Grease lubrication requires a grease supply lubrication system. |
| Working temperature | ≤70ºC | ≥273ºC | The bearing itself can withstand the temperature of 1,400ºC | ≤50ºC | ≤65ºC Short time up to 80ºC |
| Application site | For pumping stations short of clean water or pumping stations requiring short-term dry friction, hRBR grade is suitable for water quality with moderate sediment content. | Pumping stations without clean water or pumping stations requiring dry friction of more than 180S. | Pumping stations without clean water or pumping stations requiring short-term dry friction. | Extensive application in any pumping stations with clean water sources. | The liquid of the pump itself cannot be used for bearing lubrication in the pumping station. |
| Bearing type | INDRON bearing | AR bearing | Ceramic bearing | Rubber bearing | Babbitt alloy bearing |
Related Products
|
PU High Speed Shaft Seal Two Way Rod Seals For Hydraulic Cylinder Customized Material |
|
Shaft Rubber Seals High Pressure O-Ring Seals Lip Seals Blade Seals Shaft Seals OEM |
|
PU POM Shaft Seal Rod Seals PTFE NBR FKM TPE Rubber For Performance |
|
Hydrodynamic Bearing Water-Lubricated Oil Free Seals for Yacht Load and Lubrication |
|
Shaft Seal Rod Seal Hydraulic Cylinder Construction Machinery Hbts Two Way Rod Seal |
|
Heavy Duty Elastomeric Polymer Oil Deflector Customization Rotary Seals |
Email to this supplier