Joint Bearing: Wear-Resistant, Flame-Resistant, Tear-Resistant,
Heat-Resistant, Cold-Resistant INDRON® joint bearings of self-lubricating material are
suitable for guide-vane bearings and connecting-rod bearings of
tubular turbines. | Material Grade | | Bearing(lining) | INDRON®TSTN | INDRON®HRBR | INDRON®HAWF | INDRON®UNIV | INDRON®PLAT | | Material | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers | SyntheticEngineering Elastomers | Synthetic Engineering Elastomers | Synthetic Engineering Elastomers | | Recommended Workplace | Guide Bearings & Seals | Guide Bearings& Seals | Guide Bearings & Seals | Guide van, connecting rod bushing | Guide vane, connecting rod bushing | | Temperature Limit | 70℃ | 70℃ | 70℃ | 70℃ | 70℃ | | Dry Rub | Yes | low speed | low speed | Yes | Yes | | Acid Resistance | limit | limit | limit | limit | limit | | Alkaline Resistant | limit | limit | limit | limit | limit | | Hydrocarbon Suitability | Yes | Yes | Yes | Yes | Yes | | Abrasion Resistance | good | excellent | excellent | good | good | | Friction Pair(bushing) | bronze | HRC40 | HRC40 | HRC40 | HRC40 | | Stainless | recommend | recommend | recommend | recommend | | Typical Application | water, sea water | water, sea water | water, sea water | water, sea water | water, sea water | | Most fluids(pH 5-10) | Most fluids(pH5-10) | Most fluids(pH5-10) | Most fluids(pH 5-10) | Most fluids(pH5-10) | | Note | Lowest coefficient of friction,suitable for dry running
applications, good wear resistance | Use silt water under moderate grinding conditions | Use ofsilt-containing water under high grinding conditions.
Contains abrasion resistant | high load capacity | high load capacity |
|
