Water And Oil Applicable Cast Iron Rising Stem Gate Valve With Brass Seal
|
Product Introduction: Gate valve is a like a gate, with the movement direction perpendicular to the direction of the fluid, and gate valve can only be fully open and closed, not adjusted or throttled. This gate valve is open stem, has two sealing faces, with brass raw material, forming a wedge with a wedge angle varying with valve parameters, usually 50, and 2°52' when medium temperature is not high, it is made into a whole body, so called the rigid gate, it is Installed in the pipeline, as a closed circuit equipment only, not allowed to adjust the flow rate and empty use. Gate valve with following working principle: turn the hand wheel to open and close the valve plate connected to the stem by the hand wheel and stem thread advance, back, lift or drop, very easy operation.
Product specification parameters:
Product features: 1. Fluid resistance is small, sealing surface by medium erosion and erosion. 2. Easy operation of open and close. 3. Medium flow is not restricted, no turbulence, no pressure reduction. 4. Simple shape, short structural length, mature manufacturing control and wide application.
|
|||||||||||||||||||||||||||||||
Product Tags: Brass Seal Cast Iron Gate Valve Water Applicable Cast Iron Gate Valve Oil Applicable Cast Iron Gate Valve |
![]() |
Water Medium Type Flange Gate Valve for Standard Applications |
![]() |
General Application Standard Slab Gate Valve with Diversion Hole |
![]() |
Sealing Performance Bevel Gear Wedge Gate Valve for Normal and High Temperature Environments |
![]() |
Water Medium Type Cast Iron Flange Gate Valve with Condensate Drain Function |
![]() |
Standard Stainless Steel CF8 Flange Gate Valve with Screw Connection Non-Standard |
![]() |
Normal Pressure Screw Connection Electric Flange Gate Valve for Industrial |