Sleek Defense Eco-Conscious Durability Matte Paint Protection Film
(PPF) – Preserve Your Car’s Matte Finish with Advanced, Sustainable
PPF Technology
Revolutionize your vehicle’s protection with Matte Paint Protection Film (PPF), engineered for drivers who prioritize understated elegance and
environmental responsibility. Unlike traditional gloss PPF, our matte variant offers a non-reflective, satin finish that
complements luxury and off-road vehicles alike. Crafted from 100%
thermoplastic polyurethane (TPU) with eco-friendly adhesive technology, this matte car protection film guards against rock chips, acid rain, and UV damage while
reducing environmental impact.
Technical Parameters:
Typical Application | Paint, Metal & Surface Protection Films |
|
Polymer | Aliphatic Polyurethane (TPU) |
|
Total Thichness | 260-370 micron |
|
TPU | 130-212 ±10 micron | Lubrizol® |
Glue | 25±5 micron | Ashland® |
Coating | Hard Coating,Good Resistance to Rain Spots | Cashew® |
Protective Film | Super Glossy PET Film 50 micron |
|
Release Film | Milky PET Film 70 micron |
|
Width | 60 inches (1.52meters) |
|
Length | 16.4 yards(15meters) |
|
Key Attributes | -Smooth Surfaces |
|
-Against Yellowing |
|
-Self Healing Function |
|
-Top Coat Solvent Acid Proof |
|
Basic Parameter | Test Method | Conclusion |
Temperature Resistance | -122°F--230℉ | √ |
Thermal Repair Performance | Copper Brush Under 5kg Pressure, 176°F Hot Water Completed,Repair
More Than 90% In Seconds. | √ |
Chemical Resistance | 10% Sulfuric Acid or Sodium Hydroxide Immersion for 72 Hours | √ |
Stain Resistance | ASTM E313 9B | √ |
Stone Chip Impact Resistance | SAEJ 400 passed | √ |
Puncture Resistance | GB/T 10004 >18N | √ |
Warranty Range | Water Spots, Rain Stains, Yellowing, Filmsurace Distortion | √ |
Rain Spot Resistance | No Visible Patches After Anti-Rain Spot Test | √ |
Coating Adhesion | After Cracks Appear During Stretching, It Will Not Fall Off Due to
External Scratches | √ |
Elongation at Break | ASTM D-1044 | √ |
Breaking Strength | ASTM D-1045 | √ |
UV Aging | ASTM D-4329 | √ |
FAQ
Q1: Does matte PPF require special maintenance compared to gloss
film?
A1: Yes. Use pH-neutral cleaners and avoid waxes containing
silicones, which can create uneven sheen. Our matte car protection film includes a hydrophobic topcoat for simplified upkeep.
Q2: Can I apply matte PPF over vinyl wraps?
A2: Absolutely! It’s an ideal top layer for matte car wraps, adding protection without altering the color. Ensure the vinyl is
fully cured before installation.
Q3: Will PPF interfere with my car’s parking sensors?
A3: No. KDPPF sensor-friendly design uses ultra-thin, signal-transparent material—tested on Tesla, BMW,
and Mercedes models.
Q4: Is matte PPF suitable for extreme climates?
A4: Yes. With a -40°F to 200°F tolerance, it withstands desert heat and icy winters. The anti-stain coating prevents salt corrosion in snowy regions.