Geotextile With Excellent Chemical Resistance, Impermeability And
Durability, And Outstanding UV Resistance
Product Introduction
Long fiber geotextile is made of polyester fiber as
the main raw material through a series of production processes.
This geotextile has excellent corrosion resistance, durability and
other characteristics, and has high tensile strength, tearing
strength and bursting strength and other mechanical properties.
Product Properties
1. Aging resistance: It has long-term durability and anti-aging
performance.
2. Physical properties: excellent chemical resistance, strong
stress cracking resistance, durable seepage resistance, outstanding
UV resistance, excellent low temperature embrittlement resistance.
3. Adaptable: able to adapt to different geological and climatic
conditions.
4. Convenient construction: It has a high anti-seepage coefficient,
excellent overall performance, and strong adaptability to
geological uneven settlement stress.
Product Application
Corrosion resistant long fiber geotextile is widely
used in railway, highway, sports venues, DAMS, soil and water
construction, tunnels, coastal beaches, reclamation, environmental
protection and other projects. In addition, it is also suitable for
landfill, sewage treatment plant, power plant regulation pool,
industrial, hospital solid waste and other environmental protection
projects, as well as rivers, lakes and reservoirs of seepage
prevention, plugging and reinforcement of water conservancy
projects.
Product Specification
* Grams/㎡: 100g~800g/㎡
* Width: 1.0m~6.60m
* Roll length: 50m~200m (customized request accept)
PS: Customized request accept for all above.
Product Specification and Technical Index(GB/T 17639—2023)
Item | Index |
| Nominal strength/(KN/m) |
| 6 | 9 | 12 | 18 | 24 | 30 | 36 | 48 | 54 |
| 1.00 | Longitudinal And Transverse Tensile Strength(KN/m≥) | 6.0 | 9.0 | 12.0 | 18.0 | 24.0 | 30.0 | 36.0 | 48.0 | 54.0 |
| 2.00 | Elongation Under Maximum Load In Vertical And Horizontal
Direction(%) | 30~80 |
| 3.00 | CBR Burst Strength ( KN≥) | 0.9 | 1.6 | 1.9 | 2.9 | 3.9 | 5.3 | 6.4 | 7.9 | 8.5 |
| 4.00 | Tearing Strength (KN,≥,LD/TD) | 0.15 | 0.22 | 0.29 | 0.43 | 0.57 | 0.71 | 0.83 | 1.10 | 1.25 |
| 5.00 | Sieve SizeO90,O95 (mm) | 0.05~0.30 |
| 6.00 | Vertical Permeability Coefficient (cm/s) | Kx(10ˉ1-10ˉ3) K=1.00-9.90 |
| 7.00 | Width Variation (％≥) | -0.5 |
| 8.00 | Weight Variation (%≥) | -5 |
| 9.00 | Thickness Deviation Rate(%≥) | -10 |
| 10.00 | Coefficient Of Thickness Variation(%≤) | 10 |
| 11.00 | Dynamic Punch | Hole Diameter(mm≤) | 37.0 | 33.0 | 27.0 | 20.0 | 17.0 | 14.0 | 11.0 | 9.0 | 7.0 |
| 12.00 | Longitudinal And Transverse Breaking Strength(KN)≥ | 0.3 | 0.5 | 0.7 | 1.1 | 1.4 | 1.9 | 2.4 | 3.0 | 3.5 |
| 13.00 | Uv resistance (Xenon Arc Lamp Method) | Vertical And Horizontal Strength Retention(%≥) | 70 |
| 14.00 | Uv resistance (Fluorescent UV Lamp Method) | Vertical And Horizontal Strength Retention(%≥) | 80 |
