Gold Dredging Chain Bucket Dredger For River
|
Detailed Product Description
Product Descriptioncan be customized Bucket rotates around the underwater dredging wheel, scooping up the solid in the riverbed, then trommel classifier, with single layer or double layer screens, will separate the gravels, clay balls, water plants with need sand. The discharge system could be divided into single-discharge, multi-conveyor belts and chute.
The raw materials dug up by the bucket enter the sieve for screening. The screened raw materials can enter the gold selection chute or Gold Vibrating Chute or centrifuge.(can choose according to the situation) Gold Vibrating Chute: The drum chute is a new type of gold placer selection equipment developed on the basis of ordinary fixed flow channels. It combines the advantages of fixed chutes and jigs, overcomes the disadvantages of easy settling in fixed flow channels and high yield in jigs, and thus achieves the characteristic of low yield but not easy settling. The characteristics of the drum chute: basically retaining the original characteristics of the fixed chute, the original iron bottom plate is replaced with a rubber bottom plate, and a simple eccentric drum mechanism is added to make the rubber bottom plate perform up and down reciprocating motion. The diaphragm between each chute is similar to that of a jigger. This solves the problem of grid hardening and improves the recovery rate of gold. Due to the intermittent discharge of concentrate from the drum chute, the enrichment ratio is several tens to several hundred times higher than that of a jigger. gold selection chute: The working principle of the gold selection chute is mainly to use the difference in the specific gravity between gold and sand.Through the slurry flowing through the chute, the heavy gold settles in the bottom layer, while the sand with smaller specific gravity floats in the upper layer and is discharged from the working area with the water flow. This process effectively overcomes the phenomena of chute compaction and sedimentation, and significantly improves the recovery rate of fine gold particles Centrifuge Centrifuge gold separation is an efficient physical separation method that uses centrifugal force to separate gold from other minerals. It is suitable for placer gold, rock gold, tailings recovery and other occasions. This method does not require chemical agents, is environmentally friendly and has a high recovery rate. It is particularly suitable for recovering fine gold, capillary gold, flake gold, 200-800 mesh fine gold COMPANY INFORMATION:
shandong yongsheng dredging machinery co., ltd. emma whatsapp:008615054842997 email:emma@dredgerys.com |
| Product Tags: Gold Dredging Chain Bucket Dredger River Gold Dredging Chain Bucket Dredger |
Related Products
|
45kw Main Engine Power 800mm Bucket Wheel Dredger For Mineral Mining In Depths Of 1-10m |
|
100m3/h Capacity Chain Bucket Dredger For Gold Mining |
|
80-100m3/H Bucket Chain Dredger For River Sand Mining With High Efficiency |
|
Gold And Diamond Bucket Chain Dredger 120-150m3/H |
|
Corrosion Resistant Large Chain Bucket Dredger For Gold Mining |
|
Customized River Gold Chain Bucket Dredger With Agitation Chute |
Email to this supplier