Fast Arrival Spray Waterproof Flexible Polyurethane Sealant PU Foam
|
|
Fast Arrival Spray Waterproof Flexible Polyurethane Sealant PU Foam
Where To Use: PU Foam is for all-season, all weather, multi-purpose use such as:
1.Mounting of window and door frames Sealing of all types of cracks and holes.
2.Insulation of water-pipe network, central heating.
3.Soundproofing of partition walls, car and boat cabins etc.
Product Paramenters
Product Features:
1. Excellent adhesion on most substrates. 2. Installation, fixing and insulating of door and window frames. 3. Filling and sealing of gaps, joint, openings and cavities. 4. Bonding and mounting 5. Installation the electrical outlets and water pipes. 6. Heat preservation, cold and sound insulation.
APPLICATIONS AREAS 1.Installing, fixing and insulating of door and window frames. 2.Filling and sealing of gaps, joint, openings and cavities. 3.Connecting of insulation materials and roof construction. 4.Bonding and mounting. 5.Insulating the electrical outlets and water pipes. 6.Heat preservation, cold and sound insulation. 7.Packaging purpose, wrap the precious & fragile commodity, shake-proof and anti-pressure. APPLICATION INSTRUCTIONS 1, Remove the dust, greasy dirt on the surface before construction. 2, Spray a little water on construction surface when the humidity is below 50 degrees, otherwise the heartburn or punch phenomenon will appear . 3, The flow rate of the foam can be adjusted by the control panel. 4, Shake the container for 1 minute before using, connect material container with spray gun or spray pipe, the filler content is 1/2 of the gap. 5, Use dedicated cleaning agent to clean the gun Surface drying time is about 5 minutes, and it can be cut after 30 minutes, after 1 hour the foam will be cured and achieve stable in 3-5 hours. 6, This product is not UV-proof, so it is suggested to be cut and coated after the foam curing (such as cement mortar, coatings,etc.) 7, Construction when temperature is lower than -10 ℃, to ensure the material can be exhausted and increase the foam expansion, it should be heated by 40 ℃ to 50 ℃ warm water   SAFETY RECOMMENDATION 1, Store the product in a dry, cool and atmospheric place with temperature under 45℃. 2, The after-use container is forbidden to be burnt or punctured. 3, There should be atmospheric condition in construction site, the constructor should wear work gloves and goggles, don’t be close to combustion source and don’t smoke. 4, It is forbidden to invert or side lay in storage and transportation. (long inversion can cause valves blocking 5, This product contains micro harmful element, has certain stimulation to eyes, skin and respiratory system, In case the foam sticks to eyes, washing the eyes with clean water immediately or follow the doctor’s advice, washing the skin with soap and clean water if touching the skin.
Factory pictures
|
| Product Tags: Fast Arrival Polyurethane Foam Sealant Spray Waterproof Polyurethane Foam Sealant Flexible Polyurethane Foam Sealant |
|
Polyurethane Foam Sealant Sound-insulating Heat-preserving Foam Adhesive Wooden Door |
|
Polyurethane Foam Gap Filler Flameretardant Ship Adhesion White Expanding Foam Adhesive |
|
High Strength Construction PU Glue Waterproof Concrete Polyurethane Sealant |
|
Factory Direct 750ml Expandable Foam PU Chemical Polyurethane Sealant |
|
One Component Low Modulus PU Foam Polyurethane PU Joint Adhesive Sealant |
|
PU Polyurethane Super Quality Gap Filling Spray Pu Construction Foam Sealant |