Polyurethane Foam Sealant Buildings Houses Environmentally Friendly Foam Sealant

Polyurethane Foam Sealant Buildings Houses Environmentally Friendly Foam Sealant

Factory Information:

With 20 years of glue-making experience, the factory covers an area of 40,000 square meters, is equipped with highly

mechanized equipment, has a daily output of 30,000 pieces, and more than 200 production and R&D personnel. The source

factory supports OEM/ODM. The products have high cost performance. We look forward to your contact.

HONGSHUYE SPRAY INSULATION FOAM is a kind of high thermosetting polyurethane foom. It can form a continuous

thermal insulation layer. It is widely used for roof and wall thermal insulation.
 

TYPICAL USES :

1. Ideal for ceiling insulation

APPLICATION INSTRUCTIONS

1, Remove the dust, greasy dirt on the surface before construction.

2, Spray a little water on construction surface when the humidity is below 50 degrees, otherwise the heartburn or punch

phenomenon will appear .

3, The flow rate of the foam can be adjusted by the control panel.

4, Shake the container for 1 minute before using, connect material container with spray gun or spray pipe, the filler content is

1/2 of the gap.

5, Use dedicated cleaning agent to clean the gun Surface drying time is about 5 minutes, and it can be cut after 30 minutes,

after 1 hour the foam will be cured and achieve stable in 3-5 hours.

6, This product is not UV-proof, so it is suggested to be cut and coated after the foam curing (such as cement mortar,

coatings,etc.)

7, Construction when temperature is lower than -10 ℃, to ensure the material can be exhausted and increase the foam

expansion, it should be heated by 40 ℃ to 50 ℃ warm water
 

Factory Pictures

Contact
 

FAQ