New Original ARM MCU STM32F730R8T6 STM32F730 STM32F LQFP-64 microcontroller Stock IC

Introduction to STM32F730R8T6

The STM32F730R8T6 is a high-performance microcontroller from STMicroelectronics. It is part of the STM32F7 series and is built on a 32-bit ARM Cortex-M7 core. The microcontroller offers a wide range of features and peripherals, making it suitable for a variety of applications, including industrial control, consumer electronics, and motor control.

Features

The STM32F730R8T6 microcontroller offers a wide range of features, including:

• 32-bit ARM Cortex-M7 core running at up to 216 MHz
• 64 KB Flash memory and 256 KB SRAM
• Multiple communication interfaces, including Ethernet, USB OTG HS, and CAN
• Multiple timers and PWM channels
• Low-power modes for energy-efficient operation

Peripherals

The STM32F730R8T6 microcontroller offers a range of peripherals, including:

• Ethernet MAC: The microcontroller features an Ethernet MAC interface that supports 10/100/1000 Mbps operation. The interface is compliant with IEEE 802.3 and supports both full- and half-duplex operation.
• USB OTG HS: The microcontroller features a high-speed (HS) USB OTG interface. The HS interface supports up to 480 Mbps operation and is compliant with USB 2.0.
• CAN interface: The microcontroller features a CAN interface that supports both CAN 2.0A and CAN 2.0B protocols. The interface supports up to 1 Mbps operation and features advanced filtering and error detection capabilities.
• ADC: The microcontroller features a 12-bit ADC with up to 16 channels and a 5 MSPS conversion rate. The ADC supports both single-ended and differential inputs and features advanced sampling and trigger capabilities.
• Timers and PWM channels: The microcontroller features multiple timers and PWM channels, including 2 general-purpose timers, 2 advanced-control timers, and 3 basic timers. The timers support a wide range of modes and features, including PWM, input capture, and output compare.

Development Tools

The STM32F730R8T6 microcontroller is supported by a range of development tools, including:

• STM32CubeMX: A graphical tool that allows developers to configure the microcontroller and generate initialization code.
• STM32CubeIDE: An integrated development environment (IDE) that provides a complete development environment for the microcontroller, including code editing, compilation, and debugging.
• STM32 Nucleo-64 board: A development board that features the STM32F730R8T6 microcontroller and provides access to all the microcontroller's peripherals.

Specifications

The following table provides an overview of the key specifications for the STM32F730R8T6 microcontroller:

Conclusion

The STM32F730R8T6 microcontroller is a high-performance microcontroller that offers a range of features and peripherals suitable for a wide range of applications. Its 32-bit ARM Cortex-M7 core, combined with its advanced peripherals and low-power modes, make it suitable for a wide range of applications, including industrial control, consumer electronics, and motor control. With support from a range of development tools, including STM32CubeMX and STM32CubeIDE, developers can quickly and easily get started with the microcontroller and take advantage of its full capabilities.