ADG1419BCPZ-REEL7 IC Integrated Chip Logic Compatible 5V digital multiplexer

ADG1612BCPZ-REEL7 Electronic IC Chip 0.2Ω

Shipping overseas is convenient with the electronic component packed in 8-WFDFN Exposed Pad, CSP. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -40°C~125°C TA. In total, there have been 8 terminations. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. 8 pins are injected to the electronic part body. A SPDT switching circuit is used for these analog switches.

Try searching for the analog switch ic with ADG1419 if you are looking for variants. This digital multiplexer has 2.4Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 5V. A digital multiplexer may suffer damage if voltage is applied above 190μA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. This electrical part is compatible with 12V operating voltages. A 1 input needs to be operated. A 135MHz-bandwidth can be used for data transfer. There is 2.4Ohm resistance between Drain and Source for this electronic part. An output of 2 is provided by the digital multiplexer. Resistance Flatness.

FEATURES

2.1 Ω on resistance
0.5 Ω maximum on-resistance flatness at 25°C
Up to 390 mA continuous current
Fully specified at +12 V, ±15 V, ±5 V
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
8-lead MSOP and 8-lead, 3 mm × 2 mm LFCSP