Reinforced Thermal Insulation HVAC Aluminum Foil Tape Laminated Closer PE Mesh Tape

Reinforced Aluminum Foil Laminated PE Mesh Tape - FEM7105AH / FEM7205AH

Description:

FEM7105AH

Foil-PE Mesh laminated fiberglass blanket backing, combined with high performance thicker improved synthetic rubber-resin adhesive, protected by an easy-release silicone release paper. 

FEM7205AH

Foil-PE Mesh laminated fiberglass blanket backing (Closer PE Mesh), combined with high performance thicker improved synthetic rubber-resin adhesive, protected by an easy-release silicone release paper.

Standard Products:

Typical Physical Properties:

Features:

• Foil-PE Mesh backing provides excellent reflection of both heat and light.

• High quality adhesive with super strong adhesion and holding power offers reliable and durable

  Foil-PE Mesh Facing joints and seams sealing in HVAC ductwork application.

• Low moisture vapor transmission rate makes FEM7105AH an excellent vapor barrier.

• Service Temperature range from -20 ~ +80 °C (-4~ +176 °F).

Applications:

HVAC industry for joining and sealing Foil-PE Mesh laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

Packaging & Shipping

Surface Preparation

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

Product Use

It is essential that the user evaluate the KintTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on KintTape products between +10℃ ~ 40℃(+50°F ~ +105°F).