alumina ceramics tube bearing various machine shaft accessories
high using frequency
product name:alumina ceramic tube
The properties of alumina ceramic tube :
1.High hardness
It is determined that the Rockwell hardness of alumina is HRA80-90,
and the hardness is only second to diamond, far exceeding the wear
resistance of wear-resistant steel and stainless steel.
2, excellent wear resistance
The wear resistance of alumina ceramic material is 266 times as
much as that of manganese steel and 171.5 times as much as that of
high chromium cast iron. According to our customer tracking survey
for more than ten years, it can extend the service life of the
equipment by at least ten times under the same working conditions.
3, light weight
The density of alumina ceramic material is 3.7 ~ 3.95g / cm °,
which is only half of steel, and can greatly reduce the equipment
load.
4 , Wide range of application
Alumina ceramics are widely used in machinery, optical fiber,
cutting tools, medical, food, chemical, aerospace and other fields.
products index:
| Ceramic characteristic table |
| | name | 99% AL2O3 | 95% AL2O3 |
| physical propertyessential component | essential component | AL2O3≥99% | AL2O3≥95% |
| Density(g/cm3) | 3.85 | 3.6 |
| water absorption% | 0 | 0 |
| sintering temperature | 1690 | 1670 |
| material characters | Hardness(HV) | 1700 | 1600 |
| break off strength | >6500 | >2900 |
| compressive strength | 30000 | 25000 |
| thermal response | maximum service tempera- ture | 1500 | 1400 |
| thermal expansion coefficient | 8 | 7.8 |
| 10-6/℃ |
| 0-1000℃ |
| Heat shock resistance T(℃) | 200 | 220 |
| thermal conductivity W/m.k | 31 | 22 |
| electrical specification | volume resistivity Ω.cm | >1012 | >1012 |
| Insulation destructive power KT/m | 18 | 16 |
| dielectric constant 1MHZ(E) | 9.2-10.5 | 9.0-10 |
Workshop warehouse products:
