Casting Epoxy Resin Curing Agent And Hardener Electrical Insulating

Epoxy Resin Curing Agent Epoxy Resin And Hardener For Electrical Insulators With Casting Process

TDS:

Flexural strength ISO 178: 2001 MPa 110 - 125

Surface strain % 1.5 - 1.7

E modulus MPa 8000 - 9500

Critical stress intensity factor (K IC ) MPa·m ½ 2.4 - 2.6

Glass transition temperature ISO 11357-2: 1999°C 65 - 80

Coefficient of linear thermal expansion ISO 11359: 1999

Mean value below Tg ppm/K 40 - 43

Water absorption (specimen: 50x50x4 cm) ISO 62

60 min at 100°C % by wt. 0.15 - 0.20

Density at 20°C g/cm³ 1.65 – 1.75

Thermal life Class (20000h)

PRODUCT NAME:

Epoxy Electrical Insulation System

Client Product:

Equipment used by customers:

Hubei Plant and Guangdong Plant:

ISO certifcate:

Part of our customers:

FAQ:

1. What’s the Pre-filled?

Pre-filled is the resin or hardener has been filled with silica sands before delivering to you.

2. Is Pre-filled resin cheaper than Pure resin?

Generally it is. However, you should consider the final cost. If you can find qualified silica sands in you local market, the pure resin is better choice. Silica sands are very cheap, sea freight cost is high. With same quantity of resin in a shipment, you can get more final mixed resin with local silica sands.

3. Why JiangTe resin doesn’t offer Flexibilizer and Accelerator?

We’ve added them into resin/hardener already before delivering to you. So you can use our materials easily