Pre - Filled Electrical Insulating Epoxy , Liquid High Viscosity Epoxy Resin

Electrical Insulation Epoxy Resin for 33kv Bushing of High Viscosity with APG Process

Product ratio:

PRODUCT NAME:

EPOXY RESIN FOR LBS, BUSHINGS, SPOUTS, MONOBLOCK, SWITCH GEARS, EMBEDDED POLES, INSULATORS

TDS:

Characteristics:

Strong adhesion 

Good insulation

Good process performance

Good surface gloss and electrical resistance

Excellent moisture resistance

1. Appearance& Characteristics:

2. Mixing ratio: JT2051A/JT2051B=4/1(pbw)

3. Applicable time: 25-40mintus at 25℃( mixture: 100g)

4. Curing condition: 8-12h@25℃ or 6h@60℃, full curing takes 3days at Room temperature.

5. Process:

Mixing two components in a certain proportion and keep it for 10minutes, brush them to the iron core after the viscosity is increasing.

6. Properties:

7. Packing:

Component A: 24kg

Component B: 6kg

8. Storage

The product should be sealed in the original packaging container, stored in a dry and ventilated place to save. The shelf life is 6 months under 18~40℃ condition . If exceeds the shelf life time, it needs to be tested again to confirm whether it can be used or not.

Client Product:

Equipment used by customers:

Hubei Plant and Guangdong Plant:

ISO certifcate:

Part of our customers:

FAQ:

1. What’s the Pre-filled?

Pre-filled is the resin or hardener has been filled with silica sands before delivering to you.

2. Is Pre-filled resin cheaper than Pure resin?

Generally it is. However, you should consider the final cost. If you can find qualified silica sands in you local market, the pure resin is better choice. Silica sands are very cheap, sea freight cost is high. With same quantity of resin in a shipment, you can get more final mixed resin with local silica sands.

3. Why JiangTe resin doesn’t offer Flexibilizer and Accelerator?

We’ve added them into resin/hardener already before delivering to you. So you can use our materials easily